KF 5² Square SE RTA Clone $21.99
The KF 5² Square SE RTA Rebuildable Tank Vape Atomizer Clone is constructed from Stainless Steel (body) and PSU (tank tube) in 25mm Diameter. The RTA comes with a 7.0ml E-juice capacity tank tube. It features single coil build deck, which support DL vaping experience, liquid flow control and top filling system.

Original Auguse 2 in 1 Slotted & Phillips Screwdriver $2.99
The Auguse 2 in 1 Screwdriver can be used as a Slotted Screwdriver or a Phillips Screwdriver. It is made of Stainless Steel in 62mm Length, 5.2mm Diameter.

Noi Replacement MTL 510 Drip Tip Clone for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $3.99
The Noi Replacement MTL 510 Drip Tip Clone is made of POM material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Diamond Replacement MTL 510 Drip Tip for RDA / RTA/RDTA/Sub-Ohm Tank Vape Atomizer $3.99
The Auguse Diamond Replacement MTL 510 Drip Tip is made of POM and Acrylic material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Auguse Replacement 510 Drip Tip is made of POM and PEI, SS material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Replacement MTL 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Auguse Replacement MTL 510 Drip Tip is made of POM material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Replacement MTL 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Auguse Replacement MTL 510 Drip Tip is made of POM material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Replacement MTL 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Auguse Replacement MTL 510 Drip Tip is made of POM material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Replacement MTL 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Auguse Replacement MTL 510 Drip Tip is made of POM material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Replacement MTL 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Auguse Replacement MTL 510 Drip Tip is made of POM material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Replacement MTL 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Auguse Replacement MTL 510 Drip Tip is made of POM material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Original Auguse Replacement Top Cap Tank Tube for Auguse V1.5 MTL RTA $8.99
The Auguse Replacement Top Cap Tank Tube is designed for Auguse V1.5 MTL RTA Vape Atomizer as a replacement part. It features 4.0ml E-juice capacity and is made of PEI material.

Original Auguse Replacement Top Cap Tank Tube with Top Refilling System for Auguse V1.5 MTL RTA $7.99
The Auguse Replacement Top Cap Tank Tube w/ Top Refilling System is designed for Auguse V1.5 MTL RTA Vape Atomizer as a replacement part. It features 4.0ml E-juice capacity and is made of Stainless Steel and PC material.

Replacement Long 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Replacement 510 Drip Tip is made of SS material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Replacement Short 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Replacement 510 Drip Tip is made of SS material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Replacement Top Cap Tank Tube Nano Kit for Taifun GT4 S GT 4 S IV S DL RTA Clone $7.99
The Taifun Replacement Top Cap Tank Tube Nano Kit is designed for Taifun GT4 S GT 4 S IV S DL RTA Vape Atomizer Clone as a replacement part. It is made of Stainless Steel and PC material, and features 2.9ml E-juice capacity.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>

SXK Stickman SLGT V2 Gera GT 60W VW Vape Box Mod Clone $129.90
The SXK Stickman SLGT V2 Gera GT Box Mod Clone is a VW Variable Wattage Box Vape Mod, which is constructed from Stainless Steel and Carbon Fiber, it is powered by 1 x 21700 Battery (Not included) and comes with 18650 Adapter Ring. The Stickman SLGT V2 is equipped with Evolv DNA 60 Chip. The DNA 60 is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv's patented Wattage Control, Temperature Protection, Preheat, OLED Screen, Reverse Polarity Protection, and waterproof onboard buttons. The DNA 60 runs from a single lithium polymer or lithium-ion battery, and features battery monitoring.

Original Asmodus Galatek RDA with BF Pin original price $29.99, now only $9.99
The Asmodus Galatek RDA is a low profile RDA with unique graveyard deck, which is constuctred from Stainless Steel in 24mm Diameter, it allows enough space for easy coil building in such low profile atomizer. The metal cage that sits between the drip tip and top cap can absorb and dissipate the excess heat.

Original IJOY Captain 2 180W TC VV VW Mod Vape Starter Kit with Captain V Tank $59.99
The IJOY Captain 2 Kit consists of IJOY Captain 2 180W TC VV VW Box Mod and Captain V Tank Atomizer. Captain 2 continues the amazing design and performance of the Captain series of mods. IJOY Captain 2 Box Mod is constructed from durable and lightweight Aluminum Alloy with ergonomic dimensions. Captain 2 Mod is powered by dual 18650 batteries (Not included) and has a maximum wattage of 180 watts. It has ample power and a large number of functions to bring incredible experience. In addition, IJOY Captain 2 Mod is equipped with a new 0.96-inch full-color display, which can provide more detailed working data. On the control face, you can see an oversized fire button and an ergonomic grip underneath. The IJOY Captain 2 Mod is Dust and Shock Proof, durable. The various protection systems ensure a safe vaping environment. Paired with the IJOY Captain V Tank, the Captain 2 Starter Kit can utilize coils from the IJOY Captain X3 Series, offering a myriad of options to be used to vaporize the contents of the 5ml refillable E-juice capacity. What stands out is that you will get a total of 8 coils: four 0.15ohm X3 mesh coils and four X3-C1 coils that have a 0.4ohm heating element. Featuring a threaded top fill system, the Captain V Tank is also equipped with a dual slotted bottom airflow control ring that can diffuse air entering the atomizer and are fully adjustable to your liking. It can be used with the included X3 mesh coil to produce a satisfying large vapor cloud.

Original Hangsen IQ Touch 450mAh Pod System Vape Starter Kit original price $24.99, now only $14.99
The Hangsen IQ Touch Pod System Kit is a portable pod kit with portable and slim design. IQ Touch Pod Kit is powered by built-in 450mAh battery to provide vaping. IQ Touch Pod Kit adopts touch button to check power and adjustable three-level voltages. IQ Touch cartridge maintains 2ml capacity with top filling design and 1.2ohm resistance coil. IQ Touch features intelligent breathing light and draw-activated system without switch.

Original SMOKTech SMOK & OFRF nexMesh 30W 1200mAh VW Box Mod Pod System Vape Starter Kit $26.89
The SMOKTech SMOK & OFRF nexMesh VW Box Mod Pod Kit is designed by SMOKTech and OFRF Tech. The Pod Kit is constructed from lightweight and durable Aluminum Alloy material comes with a compact size that allows you to take it to everywhere you want. Powered by an internal 1200mAh battery, nexMesh Pod kit can up to 30W max output and sports the lithium battery protection function. The nexMesh pod cartridge adopts a waterproof design that prevents condensation from entering the interior, and it is compatible with conical nexMesh coil to bring you the rich vapor and excellent flavor.

Original Vandy Vape Kylin M AIO 70W TC VV VW Box Mod RBA Pod System Vape Starter Kit original price $74.99, now only $49.99
The Vandy Vape Kylin M AIO Kit is a real rebuildable AIO Pod System Device, which brings richer flavors and rebuildable head only. Kylin M AIO has a compact size, with a beautiful pattern's side panel, eye-catching appearance. The exterior construction is well-engineered, presenting a waterproofed PCBA to prevent short circuits or water from damaging the vaping systems. Powered by an external 18650 battery (Not included), this powerful pod system is capable of providing a power output range from 5W to 70W and supports VV Mode, VW Mode, and TCSS Mode. The various options allow for a great deal of versatility with vaping. Behind the magnetic panel, the Kylin M AIO is capable of holding up to 2.5ml / 5ml of E-juice within its pod. The capacity change depends on whether the matching is a rebuildable atomizer or a pre-built coil. Up to 5ml E-juice capacity designed for rebuildable atomizer and 2.5ml for the pre-built coil. Hassle-free filling of juice by opening the side silicone plug. The top cap of Kylin M AIO Pod has a pillarless build deck inside for DIY rebuildable and pre-built coil building, single-coil configuration. The Kit comes with various types of the pre-built coil to provide DIY fun. Kylin M AIO Pod complete with single mesh coil on the bottom that is accepted in a plug 'n' play installation method. Moreover, the Vandy Vape Kylin M AIO is also featured with multiple protections to guarantee a safe vaping environment.

YFTK Replacement Tank Tube for YFTK ParavozZ k5k RDTA Clone $2.99
The YFTK Replacement Tank Tube is designed for YFTK ParavozZ k5k RDTA Clone as a replacement part. It is made of PC material.

Replacement Drip Tip for SMOKTech SMOK Fetech Pro Pod Vape Kit $1.99
The Replacement Drip Tip is designed for SMOKTech SMOK Fetech Pro Pod Vape Kit as a replacement part. It is made of resin material.

Original Hangsen IQ Touch Pod System Vape Kit Replacement Pod Cartridge with 1.2ohm Coil(3 PCS) $9.99
The Hangsen IQ Touch Replacement Pod Cartridge is designed for Hangsen IQ Touch Pod System Vape Kit as a replacement part. It features 2ml E-juice capacity, supports top refilling and easy to use, and comes with a 1.2ohm Coil. 3 PCS / Pack.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>

Original SMOKTech SMOK & OFRF nexMESH VW Mod Pod System Vape Kit Replacement Empty Pod Cartridge(1 PC) $3.99
The SMOK & OFRF nexMESH Pod Cartridge is specially designed for SMOK & OFRF nexMESH VW Mod Pod System Vape Kit. It can hold up to 2ml E-liquid and adopts waterproof design. Besides, it is compatible with 2 types of coil, 0.4ohm SS316 nexMESH Coil and 0.4ohm A1 nexMESH Coil (Coils are sold separately, not included), which is suitable for both MTL and DTL vaping.

Original Vandy Vape Kylin M AIO Mod RBA Pod System Vape Kit Replacement DIY Pod Cartridge with 5 Steel Wires(1 PC) original price $23.99, now only $18.99
The Vandy Vape Kylin M AIO Replacement DIY Pod Cartridge is designed for Vandy Vape Kylin M AIO Mod RBA Pod System Vape Kit as a replacement part. It is created for DIY fun and rebuildable atomizer, which will provide you richer flavor and satisfy your different demands.

Original SMOKTech SMOK & OFRF nexMESH VW Mod Pod System Vape Kit / Cartridge Replacement SS316 Coil(5 PCS) $10.99
The SMOK & OFRF nexMESH replacement SS316 Coil is specially designed for SMOK & OFRF nexMESH VW Mod Pod System Vape Kit as a replacement part. It features 0.4ohm coil resistance and power output range from 15W to 20W. 5 PCS / Pack.

Original SMOKTech SMOK & OFRF nexMESH VW Mod Pod System Vape Kit / Cartridge Replacement A1 Coil Head(5 PCS) $11.99
The SMOK & OFRF nexMESH replacement A1 Coil is specially designed for SMOK & OFRF nexMESH VW Mod Pod System Vape Kit as a replacement part. It features 0.4ohm coil resistance and power output range from 13W to 18W. 5 PCS / Pack.

Original Vandy Vape Kylin M AIO Mod RBA Pod System Vape Kit / Cartridge Replacement Single Mesh Coil(4 PCS) original price $12.99, now only $10.99
The Vandy Vape Kylin M AIO Replacement Single Mesh M Coil that features 0.3ohm resistance. It is designed for Vandy Vape Kylin M AIO Kit and Vandy Vape Kylin M AIO Pre-built Pod Cartridge. The best adapted power is 35~45W. 4 PCS / Pack.

Replacement Top Cap for Gas Mods G.R.1 GR1 S RDA Vape Atomizer $4.99
The Replacement Top Cap is designed for Gas Mods G.R.1 GR1 S RDA Rebuildable Dripping Atomizer as a replacement part, it is made of PEI material. Compatible with 510 drip tip.

SXK Mag Replacement MTL / DL 510 Drip Tip Clone for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer(2 PCS) original price $12.90, now only $8.99
The SXK Mag Replacement MTL / DL 510 Drip Tip Clone are made of PEEK material, it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA. The drip tip with 3 holes for DL vaping, and the drip tip with 1 hole for MTL vaping

SXK Diamond 510 Thread Adapter & Decorative Ring for SXK Stickman SLGT V2 Gera GT VW Box Mod Clone(2 PCS) original price $15.90, now only $13.79
The SXK Replacement Superleggera Diamond 510 Thread Adapter & Decorative Ring are suitable for SXK Stickman SLGT V2 Gera GT VW Vape Box Mod Clone as replacement parts. The 510 thread adapter is 30 x 8mm, and the Decorative Ring is 30 x 6mm. The product features Diamond face.

SXK Mirror 510 Thread Adapter & Decorative Ring for SXK Stickman SLGT V2 Gera GT VW Box Mod Clone(2 PCS) original price $11.90, now only $9.69
The SXK Replacement Superleggera Diamond 510 Thread Adapter & Decorative Ring are suitable for SXK Stickman SLGT V2 Gera GT VW Vape Box Mod Clone as replacement parts. The 510 thread adapter is 30 x 8mm, and the Decorative Ring is 30 x 6mm. The product features Mirror face.

PVC Wrapper Skin Sticker for 18650 Battery(20 PCS) $1.99
The PVC Wrapper Skin Sticker is commonly used for 18650 battery, Like LG MH1, LG HB6, Samsung ICR18650-26F, Samsung INR18650 batteries, etc. 20 PCS / Pack.

Original Vandy Vape Kylin M AIO Mod RBA Pod System Vape Kit Replacement Empty Pod Cartridge(1 PC) $7.99
The Vandy Vape Kylin M AIO Replacement Pod Cartridge is designed for Vandy Vape Kylin M AIO Mod RBA Pod System Vape Kit as a replacement part. It features 2.5ml E-juice capacity, and it is compatible with 0.3ohm Single Mesh Coil (Coils are sold separately)

Original VOOPOO PNP Tank for VOOPOO Drag X & Drag S VW Mod Pod Vape Kit $9.99
The VOOPOO PNP Tank is a new concept created. With 510 base at the bottom of the Drag X & Drag S Pod that fit for Drag X and Drag S kit. The tank can hold up to 4.5ml of your favorite E-juice, and refill the juice from the bottom of the Pod by twisting 510 base. Removed with just one hand, and you'll experience a simpler and cleaner way of filling oil. It comes in two forms: on its own, it's the perfect partner for Drag X and Drag S. With 510 base, it's perfect for any devices you want. PNP Tank can flexibly switch between POD and TANK. It matches perhaps the most abundant and excellent PnP coils. The adjustable air 510 base matches almost all of your devices. Installing to the POD or 510 base, or replacing the coils is easier than ever because of the new powerful magnets. PnP Tank is compatible with all PnP coils, just pull and push, you can enjoy different vaping experience.

Replacement Top Cap Tank Tube Nano Kit with Drip Tip for Taifun GT4 S GT 4 S IV S DL RTA Clone $7.99
The Replacement Top Cap Tank Tube Nano Kit is designed for Taifun GT4 S GT 4 S IV S DL RTA Vape Atomizer Clone as a replacement part. It is made of Stainless Steel and PC material, and features 2.9ml E-juice capacity.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>

Original LTQ T-FLASK 650mAh CD Vape Box Mod Compatible with ALL 510 CD Atomizers original price $19.99, now only $10.99
The LTQ T-FLASK CD Mod comes with small and tiny size, you can take the T-FLASK to anywhere as you like. T-FLASK CD Mod is powered by 650mAh built-in battery and compatible with ALL 510 CD Atomizers. The magnetic connection absolutely sheds light on the convenience and the speed of reloading. It is constructed form aluminum alloy material which is durable and create perfect hand feeling.

Original Wotofo Atty3 Cubed RDA original price $19.99, now only $4.99
The Original Wotofo Atty Cubed RDA / Atty3 RDA is the essential box mod specific RDA, combining a very strong feature set, high quality machining, and a box mod centric form factor. The Atty Cubed features a split positive center post and deck-milled negatives, with each post hole measuring 2mm in diameter. Coupled with a 6mm deep juice well, the Atty Cubed can accommodate a wide variety of build configurations. Airflow is designed as dual staggered air slots, each measuring 7mm by 2mm, allowing absolutely tremendous airflow.

Original Wotofo Serpent RDA with BF Pin original price $25.99, now only $6.99
The Original Wotofo Serpent BF RDA is constructed from aluminum and 316 Stainless Steel in 22mm diameter. It comes with a wide bore trip dip and a BF pin. The Wotofo Serpent BF RDA features dual independent posts with four wire holes and adjustable airflow. This RDA comes with bottom feeder / BF / Squonk Pin.

Original Exvape eXpromizer TCM DL RDTA $39.99
The Exvape eXpromizer TCM DL RDTA is the self-winding vaporizer from EXvape which is constructed from Stainless Steel (body), Glass (tank tube), and POM (drip tip) in 25mm Diameter, it is specially designed for direct lung vape. It features large 7.0ml e-liquid capacity with top filling way and top airflow system, the airflow will hit the coil directly to bring you the amazing flavor. The EXpromizer TCM is the first self-winding vaporizer from EXvape, which is designed for vaping for direct lung inhalation (DL). It is a top coiler vaporizer, whereby the liquid is directed from the lower tank to the cotton wool via the capillary action of stainless steel wicks. The winding deck has two clamping jaws, to which you can simply attach a screen coil or mesh coil by screwing. The air flow holes at an angle on both sides lead the air supply directly to the coil. The EXpromizer TCM is filled with Liuqid via a side fill system. By rotating the top cap, the airflow opening is positioned over the fill opening in order to fill the tank. The liquid tank can be filled with up to 7 ml of liquid. Due to the design of the evaporator and the installation of the air supply at the top, the EXpromizer TCM is a leak-proof system.

Kindbright Reborn RDTA Clone $20.99
The Kindbright Reborn RDTA Clone is constructed from 316 Stainless Steel in 22mm Diameter. The RDTA comes with single coil build deck, which is perfect with any density of E-liquid.

Original XTAR VC2 Charger for 3.6V / 3.7V Li-ion / IMR/INR/ICR: 18350, 18490, 18500, 18650, 18700, 20700, 21700 Batteries, etc. $14.99
The XTAR VC2 Charger is compatible with different kinds and sizes of most batteries like 3.6V / 3.7V Li-ion/IMR/ INR /ICR: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650. Note: VC2 cannot charge protected 20700 / 21700 batteries. VC2 Charger is equipped with an innovative Tachometer-style Display, the screen displays information from top to bottom: Charging Current, Battery Voltage, Battery Charged Capacity. It is compatible with ALL 5V USB power, including USB wall adaptors, cell phone chargers, solar panel, PC USB, power banks, etc. Recommend 5V / 2.1A power source or above to maximize efficiency.

Original XTAR VC4 Charger for 3.6V / 3.7V Li-ion / IMR/INR/ICR: 18350, 18490, 18500, 18650, 18700, 20700, 21700 Batteries, etc. $29.99
The XTAR VC4 Charger is compatible with different kinds and sizes of most batteries like 3.6V / 3.7V Li-ion/ IMR / INR / ICR: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 32650, and Ni-MH / Ni-CD: AAAA, AAA, AA, A, SC, C, D. It can maximally charge two 32650 cells (CH1 & CH4) & two 18650 cells (CH2 & CH3) simultaneously. Ni-MH symbol will flick max 10 minutes when charging Ni-MH battery due to 0V activation. Note: VC4 Charger cannot charge protected 20700 / 21700 batteries. VC4 Charger is equipped with an innovative Tachometer-style Display, the screen displays information from top to bottom: Battery Voltage, Battery Charged Capacity, Battery Types and Channels. It is compatible with ALL 5V USB power, including USB wall adaptors, cell phone chargers, solar panel, PC USB, power banks, etc. Recommend 5V / 2.1A power source or above to maximize efficiency.

Original XTAR VP2 Charger for 3.0V / 3.2V / 3.7V, 3.8V Li-ion/IMR/INR/ICR/LiFe-PO4: 18650, 18700, 20700, 21700, Batteries, etc. $37.99
The XTAR VP2 Charger is compatible with different kinds and sizes of most batteries like 3.0V / 3.2V / 3.7V, 3.8V Li-ion / IMR / INR / ICR / LiFe-PO4: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 32650. Note: VP2 Charger cannot charge protected 20700 / 21700 batteries. VP2 Charger has a selectable charging current, it can choose a charge current best suited for your battery. Lower currents maximize battery life. VP2 Charger is able to see the screen clearly at any angle. Display battery voltage and charging status accurately. Press button for 1.5s to turn off the LCD backlight.

Original XTAR VP4 Charger for 3.0V / 3.2V / 3.7V, 3.8V Li-ion/IMR/INR/ICR/LiFe-PO4: 18650, 18700, 20700, 21700, Batteries, etc. $45.99
The XTAR VP4 Charger is compatible with different kinds and sizes of most batteries like 3.0V / 3.2V / 3.7V, 3.8V Li-ion / IMR / INR / ICR / LiFe-PO4: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 32650. Note: VP4 Charger cannot charge protected 20700 / 21700 batteries. VP4 Charger has a selectable charging current, it can choose a charge current best suited for your battery. Lower currents maximize battery life. VP4 Charger is able to see the screen clearly at any angle. Display battery voltage and charging status accurately. It can maximally charge two 32650 cells (CH1 & CH4) & two 18650 cells (CH2 & CH3) simultaneously.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>

Original ThinkVape Thor AIO 80W VW Box Mod Pod System Vape Starter Kit original price $26.90, now only $20.09
The Think Vape Thor AIO Kit is a pod mod system kit that comes with ergonomic design, proper volume and compact size. It comes with a 3ml pod cartridge that is large enough to provide you with long-lasting vaping experience. And adopting adjustable airflow, it also supports 0.2ohm mesh coil and 0.5ohm mesh coil (0.2ohm and 0.5ohm Coils are included, but RBA Coils are not included), both of which will satisfy your vaping demands. Powered by a single 18650 battery (Not included), it features adjustable power in the range from 5W to 80W. Equipped with a screen, it will display you the vaping details. What's more, there are multiple protections to ensure your safety like Intelligent Atomizer Recognition, Puff Monitoring System, Over-temperature Protection, 10 Seconds Cut-off, Short Circuit Protection, Low-Battery Warning, and so on. Last but not least, Think Vape ZETA Pod Cartridge and ZETA Coils are compatible with Thor AIO Kit.

Original XTAR ROCKET SV2 Charger for 3.6V / 3.7V Li-ion/IMR/INR/18350, 18490, 18500, 18650, 18700, 20700, 21700 Batteries, etc. $38.99
The XTAR ROCKET SV2 Charger is compatible with different kinds and sizes of most batteries like 3.6V / 3.7V Li-ion/ IMR / INR / ICR: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650, 32650, and Ni-MH / Ni-CD: AAAA, AAA, AA, A, SC, C, D. Note: VC4 Charger cannot charge protected 20700 / 21700 batteries. The XTAR SV2 Charger can save your precious time, it is a fast and efficient charger that FULLY CHARGE 2 x 2500mAh 18650 just takes about 1.5HRS.

Original XTAR DRAGON VP4 Plus Charger for 3.6V / 3.7V Li-ion /IMR/INR/18350, 18500, 18650, 18700, 20700, 21700 Batteries, etc. $99.99
The XTAR DRAGON VP4 Plus Charger is compatible with different kinds and sizes of most batteries like 3.6V / 3.7V Li-ion/ IMR / INR / ICR: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22650, 25500, 26650, 32650, and Ni-MH / Ni-CD: AAAA, AAA, AA, A, SC, C, D. The battery pack is 11.1V / 3S battery pack. The Ni-MH symbol will flick max 10 minutes when charging, Ni-MH battery due to 0V activation.Note: VC4 Charger cannot charge protected 20700 / 21700 batteries. The XTAR DRAGON VP4 Plus Charger can charge your 11.1V battery pack evenly and fully. With 11.1V / 3s port, DRAGON can charge your 11.1V / 3S battery pack with 1.0A current in a balance way to make sure that all batteries of your battery pack can be fully charged. Charging battery pack should have wall adapter conecting to the power.

Original YDDZ A1 510 Thread Adapter Connector for dotMod dotAIO Pod System Vape Kit $8.99
The YDDZ A1 510 Thread Adapter Connector is designed for dotMod dotAIO Pod System Vape Kit as a replacement part, which is made from POM (Black Part) and Stainless Steel (Silver Part). With this 510 adapter, you can use 510 atomizer (RTA / RDA / RDTA / Tank) on your dotMod dotAIO Pod System.

PVC Wrapper Skin Sticker for 18650 Battery(20 PCS) $1.99
The PVC Wrapper Skin Sticker is commonly used for 18650 battery, Like LG MH1, LG HB6, Samsung ICR18650-26F, Samsung INR18650 batteries, etc. 20 PCS / Pack.

Original Kumiho K1 3 in 1 Magnetic 3A Fast Charge Sync USB Cable with 3 Types of Cable Heads for iPhone /Type-C/Android $8.99
The Kumiho K1 3 in 1 Magnetic 3A Braided Fast Charge Sync USB Cable is made of Al-alloy + Nylon Braided material in 1000mm Length, it is suitable for your iPhone / Type-C / Android Devices. It is equipped with 3 different types of magnetic cable heads contains USB Type C, Android, iPhone / iPad Cable Heads. You can switch the cable head to charge your different devices.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>

Original Augvape Intake Sub Ohm Tank Vape Atomizer original price $43.99, now only $28.99
The Augvape Intake Sub Ohm Tank is constructed from Stainless Steel (body) and Glass (tank tube) in 25mm Diameter. The Intake Sub Ohm Tank can hold between 3.5ml and 5ml of E-juice. A 3.5ml straight glass tube can be replaced with an extended version with volume of 5ml. Refilled using a top fill system, the Augvape Intake Sub Ohm Tank reveals two large fill ports to accommodate any nozzle size from E-juice bottles. The massive top was decorated in a familiar mode and crowned with a faceted twisting lid with a wide 810 drip tip. Air intake holes and a rotating ring were placed directly under the top cap, reliably protecting the Tank from accidental leaks. You can adjust the airflow by turning the air ring on the top. Within the tank, installed in a plug 'n' play manner resides a mesh coil: advanced 0.2ohm Clapton Mesh Coil, focusing and throttling the flavor and clouds directly to the taste buds via the 810 wide bore drip tip. Moreover, a 0.15ohm Coil is included to help divulge the complex flavors from your favorite E-liquid, delivering large clouds of vapor.

SXK Haku Venna RDA Clone with BF Pin original price $17.90, now only $14.99
The SXK Haku Venna RDA Clone is a low profile 22mm RDA with dual post design for single coil building. Constructed from 316 stainless steel, the RDA adopts sandblasting technology to make it feel smooth on the surface. The air enters the chamber via two different sizes of airholes on both side of the cap, hitting the coil directly. POM drip tip is included. This RDA comes with bottom feeder / BF / Squonk Pin.

Original YDDZ V1 22mm RTA $21.99
The Original YDDZ V1 RTA Rebuildable Tank Vape Atomizer is constructed from stainless steel (body) and glass (tank tube) in 22mm diameter with 4ml capacity. The YDDZ V1 RTA is with top filling system and adjustable juice control via the ring in the middle. The YDDZ V1 RTA is with adjustable side airflow with 4 sizes: 1.2mm, 1.6mm, 2.0mm, + / - 0.1 tolerance.

Original Augvape VX217 217W TC VV VW Mod Vape Starter Kit with Intake Sub Ohm Tank original price $75.99, now only $67.99
The Augvape VX217 Mod Kit consists of VX217 TC VV VW Box Mod and the latest Intake Sub Ohm Tank Vape Atomizer. It is the perfect combination of regulated battery modules and atomizer. Augvape VX217 is constructed from durable and sturdy Zinc Alloy material, which is impact resistant and withstands a certain degree of collision. The VX217 is powered by Dual 21700 Batteries and it is also compatible with 20700 and 18650 batteries. (18650 / 20700 / 21700 Batteries are not included). It's upgraded from VX200. With all relevant circuit protection, it also supports 1.2A current fast charging through Type-C port. In terms of output, the maximum output power of VX217 is 217W. Similarly, the VX217 mod will reach 12V and can emit 0.05~3ohm. It's safe to say this is the first mod that can reach 12V. So when you use high ohm coil in a big rebuildable atomizer, you can get the fast and powerful output as well. There are several Modes: Variable Wattage, Variable Voltage, Temperature Control, and Bypass user modes you can choose from. VX217 is equipped with a 1.3-inch color screen with 240 x 240RGB resolution and offers hundreds of color options. The UI simulates the car dashboard which is cool and beautiful. You can read vape time, mode, wattage, voltage, resistance, batteries life. VX217 Kit uses a minimalist design, canceling plus and minus buttons, can using spin button matches with the UI of the screen.
Intake Sub Ohm Tank can hold up to 5ml of E-liquid, you can easily fill from above, cleaning or replacing the coil head will not cause any trouble. The prefabricated Coil head is a new mesh coil made of Clapton wire, which can further improve the taste and form huge clouds. Better flavor and a longer lifespan than regular mesh coil.

Original Justfog Minifit Max 7W 650mAh Pod System Vape Starter Kit $16.99
The Justfog Minifit Max Pod Kit is a compact and portable pod system kit. It is known as an upgraded version of Justfog Minifit Kit. Compared with 370mAh Minifit Kit, Minifit Max Kit is powered by a 650mAh internal battery, but both of them adopt the same pod cartridge that holds 1.5ml E-juice and supports 1.6ohm Japanese organic cotton coil. As it utilizes safe and healthy cotton coil, you can experience the pure and smooth flavor. Moreover, there are multiple protections to ensure your vaping safety.

Universal Desktop USB Charging Station with 6 USB Ports Compatible with ALL Kinds of USB Enabled Devices $39.99
he Universal Desktop USB Charging Station with 5V / 10A that can charge 6 devices at the same time, such as ipad, iphone or other smart phones. There is a removable cable 1500mm making it easier for taking and charging. 7 PCS Clear Dividers on each charger to keep your desk uncluttered. The USB Charging Station is made from ABS fireproof material, it can input range from 100V to 220V, 50 / 60Hz.

Original XTAR X2 Charger for 3.6V / 3.7V Li-ion / IMR / INR / 18350 / 18500 / 18650/18700/20700/21700 Batteries, etc. - US Plug $28.99
The XTAR X2 Quick Charger is a new high current intelligent charger with simple and convenient operation. It has great compatibility, which can work with different batteries. It also features two battery slots with LCD display that you can see the charging situation clearly. The X2 regulates the voltage and current delivered to the batteries in three automatic stages, ensuring batteries receive optimum charging with minimal wear and tear. It also has the great soft start function, which can increase the output current slowly to protect the batteries. The XTAR X2 Charger is compatible with different kinds and sizes of most batteries like 3.6V / 3.7V Li-ion/ IMR / INR / ICR: 14500 / 14650 / 16340 / 17335 / 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 20700 / 21700 / 22650 / 25500 / 26650, and 1.2V Ni-MH / Ni-CD: AAAA / AAA / AA / A / SC / C. Note: The XTAR X2 Charger cannot charge protected 20700 / 21700 batteries.

Original XTAR X4 Charger for 3.6V / 3.7V Li-ion / IMR / INR / 18350 / 18500 / 18650/18700/20700/21700 Batteries, etc. - US Plug $41.99
The XTAR X4 Quick Charger is a new high current intelligent charger with simple and convenient operation. It has great compatibility, which can work with different batteries. It also features four battery slots with LCD display that you can see the charging situation clearly. The X4 regulates the voltage and current delivered to the batteries in three automatic stages, ensuring batteries receive optimum charging with minimal wear and tear. It also has the great soft start function, which can increase the output current slowly to protect the batteries. The XTAR X4 Charger is compatible with different kinds and sizes of most batteries like 3.6V / 3.7V Li-ion/ IMR / INR / ICR: 14500 / 14650 / 16340 / 17335 / 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 20700 / 21700 / 22650 / 25500 / 26650, and 1.2V Ni-MH / Ni-CD: AAAA / AAA / AA / A / SC / C. Note: The XTAR X4 Charger cannot charge protected 20700 / 21700 batteries.

Original Augvape Intake Sub Ohm Tank Replacement Clapton Mesh Coil Heads(5 PCS) $10.99
The Augvape Intake Replacement Clapton Mesh Coil Heads are designed for Augvape Intake Sub Ohm Tank Vape Atomizer as replacement parts. The Clapton Mesh Coil is made from Kanthal and Nichrome material, which features 0.2ohm coil resistance and output range from 60W to 75W. 5 PCS / Pack.

Original Augvape Intake Sub Ohm Tank Replacement Mesh Coil Heads(5 PCS) $10.99
The Augvape Intake Replacement Mesh Coil Heads are designed for Augvape Intake Sub Ohm Tank Vape Atomizer as replacement parts. The Mesh Coil is made from Kanthal material, which features 0.15ohm coil resistance and output range from 60W to 75W. 5 PCS / Pack.

Original VOOPOO PNP Tank for VOOPOO Drag X & Drag S VW Mod Pod Vape Kit(1 PC) $10.99
The VOOPOO PNP Tank is a new concept created. With 510 base at the bottom of the Drag X & Drag S Pod that fit for Drag X and Drag S kit. The tank can hold up to 4.5ml of your favorite E-juice, and refill the juice from the bottom of the Pod by twisting 510 base. Removed with just one hand, and you'll experience a simpler and cleaner way of filling oil. It comes in two forms: on its own, it's the perfect partner for Drag X and Drag S. With 510 base, it's perfect for any devices you want. PNP Tank can flexibly switch between POD and TANK. It matches perhaps the most abundant and excellent PnP coils. The adjustable air 510 base matches almost all of your devices. Installing to the POD or 510 base, or replacing the coils is easier than ever because of the new powerful magnets. PnP Tank is compatible with all PnP coils, just pull and push, you can enjoy different vaping experience.

SXK Mission Tips Integrated Whistle Drip Tip Mouthpiece Clone + Base for SXK BB Box Mod original price $16.90, now only $12.99
SXK Mission Tips Integrated Whistle Drip Tip Clone is suitable for SXK BB Box Vape Mod Kit Clone as a replacement. The Drip Tip Set consists of 3 x Drip Tip Mouthpiece and 1 x Mouth Base and 4 x Plugs. They are made of PEI material. The Diameter of Plugs are: 1.5mm / 2.5mm / 3.5mm / 4.5mm.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>

Original Dovpo Odin DNA250c 200W TC VW Vape Box Mod $179.99
The Dovpo Odin DNA250c TC VW Vape Box Mod is compact and lightweight. Equipped with the worldwide known Evolve DNA250c Chip, it is a hard wearing and user-friendly chip that can connect to the computer for slight fine-turning and the theme modifications (Although a custom theme is already installed). The box mod is powered by dual 21700 / 20700 / 18650 batteries (Not included), which make the mod still maintains a small and ergonomic form. Furthermore, the box mod also provides various of safety functions: reverse polarity protection, atomizer protection, overheat protection.

Original Steam Crave Aromamizer Ragnar RDTA original price $62.99, now only $50.99
The Steam Crave Aromamizer Ragnar RDTA is constructed from Stainless Steel (body) and Glass (tank tube) in 35mm Diameter. The RDTA comes with a postless deck with bottom honeycomb air holes. The smooth airflow system can provide you a medium and high power vaping, which supports 80% side airflow and 20% bottom airflow. As for the chamber reducer, it is actually a deck adaptor, with this adaptor, you can use mesh deck of Aromamizer Plus, and you can also use other decks of Aromamizer Plus like Postless Deck, Series Deck, Velocity Deck, and Single Coil Deck.(Not included) But, we recommend that you choose MESH DECK to get a good vaping experience! The RDTA comes with 22mm wide bore 810 drip tip and a large E-liquid tube of 18ml Capacity. It is worthy to say that Ragnar RDTA is perfect match with HADRON 220 MOD.

Original VOOPOO Replacement PnP-VM5 Mesh Coil Heads for VOOPOO DRAG S / DRAG X VW Mod Pod Vape Kit(5 PCS) $12.99
The VOOPOO Replacement PnP-VM5 Mesh Coil Heads is suitable for VOOPOO DRAG S VW Mod Pod Vape Kit / VOOPOO DRAG X VW Mod Pod Vape Kit as replacement parts. The PnP-VM5 Mesh Coil features 0.2ohm coil resistance that power range from 40W to 60W, and the suggested E-liquid Nicotine < = 10mg. 5 PCS / Pack.

Original VOOPOO Replacement PnP-VM6 Mesh Coil Heads for VOOPOO DRAG X VW Mod Pod Vape Kit(5 PCS) $12.99
The VOOPOO Replacement PnP-VM6 Mesh Coil Heads is suitable for VOOPOO DRAG X VW Mod Pod Vape Kit as replacement parts. The PnP-VM6 Mesh Coil features 0.15ohm coil resistance that power range from 60W to 80W, and the suggested E-liquid Nicotine < = 10mg. 5 PCS / Pack.

Original Steam Crave Hadron 220W TC VW Box Mod Replacement Squonk Backpack $24.99
The Steam Crave Hadron Replacement Squonk Backpack is designed for Steam Crave Hadron 220W TC VW Box Mod, which is used to add on your Steam Crave Hadron Box Mod that can transform into a regulated squonk beast.

Original Steam Crave Replacement Dual Mesh Strips for Aromamizer Plus / Ragnar RDTA(10 PCS) $3.99
The Steam Crave Replacement Dual Mesh Strips is suitable for Steam Crave Aromamizer Plus RDTA / Steam Crave Ragnar RDTA, which is made of Kanthal A1 material and features 0.15ohm resistance. (0.15 +/- 0.03ohm) 10 PCS / Pack.

Original Steam Crave Replacement Mesh Strips for Aromamizer Plus / Ragnar RDTA(10 PCS) $3.99
The Steam Crave Replacement Mesh Strips is suitable for Steam Crave Aromamizer Plus RDTA / Steam Crave Ragnar RDTA, which is made of Kanthal A1 material and features 0.15ohm resistance. (0.15 +/- 0.03ohm) 10 PCS / Pack.

Original Steam Crave Replacement Mesh Strips for Aromamizer Plus / Ragnar RDTA(10 PCS) $3.99
The Steam Crave Replacement Mesh Strips is suitable for Steam Crave Aromamizer Plus RDTA / Steam Crave Ragnar RDTA, which is made of Ni60 material and features 0.14ohm resistance. (0.14 +/- 0.03ohm) 10 PCS / Pack.

Original Steam Crave Replacement Mesh Strips for Aromamizer Plus / Ragnar RDTA(10 PCS) $3.99
The Steam Crave Replacement Mesh Strips is suitable for Steam Crave Aromamizer Plus RDTA / Steam Crave Ragnar RDTA, which is made of SS316L material and features 0.14ohm resistance. (0.14 +/- 0.03ohm) 10 PCS / Pack.

Original Steam Crave Replacement Mesh Strip Shoelace Cotton for Mesh Deck / RBA / RDA / RTA / RDTA Vape Atomizer(10 PCS) $3.99
The Steam Crave Replacement Mesh Strip Shoelace Cotton are suitable for Mesh Deck / RBA / RTA / RDA / RDTA Vape Atomizer as a replacement part. 10 PCS / Pack.

Mission Tips Integrated Whistle Drip Tip Mouthpiece Clone + Base for SXK BB Box Mod $9.99
The Mission Tips Integrated Whistle Drip Tip Clone is suitable for SXK BB Box Vape Mod Kit Clone as a replacement. The Drip Tip Set consists of 3 x Drip Tip Mouthpiece and 1 x Mouth Base and 4 x Plugs. They are made of PEI material. The Diameter of Plugs are: 1.5mm / 2.5mm / 3.5mm / 4.5mm.

Mission Tips Integrated Whistle Drip Tip Mouthpiece Clone + Base for SXK BB Box Mod $8.99
The Mission Tips Integrated Whistle Drip Tip Clone is suitable for SXK BB Box Vape Mod Kit Clone as a replacement. The Drip Tip Set consists of 3 x Drip Tip Mouthpiece and 1 x Mouth Base and 4 x Plugs. They are made of Acrylic material. The Diameter of Plugs are: 1.5mm / 2.5mm / 3.5mm / 4.5mm.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>

Original Vaptio Capt'n 220W Box Mod original price $67.99, now only $14.99
The Vaptio Capt'n 220W Mod is an innovative TC VW Vape Box Mod, which perfectly compatible with Vaptio Paragon Tank (Not included). Capt'n 220W Mod is powered by Dual 18650 batteries (Not included) with output wattage range from 10W to 220W, and comes with Zinc-alloy frame and IML panel body. Capt'n Mod supports stable and high performance VW / TC modes with 0.005s fire speed. Equipped with 1.3-inch TFT color screen, firmware upgradeable, the Vaptio Capt'n Mod will bring you a good vaping experience.

Original Vaptio C-II VW Mod Kit with C-II Sub Ohm Tank original price $29.99, now only $19.99
The Vaptio C-II VW Box Mod Vape Starter Kit consists of Vaptio C-II VW Box Mod and Vaptio C-II Sub Ohm Tank, which is powered by a large 3000mAh Built-in Battery with range from 30W to 100W output. The mod kit comes with a 4.0ml glass tank tube and two 0.25ohm clapton coils, it is also compatible with other different kinds of coils like PW41129A 50W Max. 0.25ohm Kanthal Coil, KW41128A 100W Max. 0.15ohm Kanthal Coil and so on. (Coils are not included). The mod kit has one button design with a compact size, which is easy to use and convenient to carry during travel. The tank features in bottom adjustable airflow, which can give you a smooth vaping experience.

Original Vaptio Wall Crawler TC VW Mod Kit with Frogman C Tank original price $55.90, now only $20.99
The Wall Crawler TC VW Mod Vape Starter Kit consists of Wall Crawler Mod and Frogman C Tank. The mod kit is powered by single 18650 battery (Not included) with Max. 80W output, it adopts supercharger technology, and fire it up to the max throttle only takes 0.005 second. Under bypass mode, the resistance go as low as 0.05ohm. On top of Vaptio's existing SMOOTH TECH flavor optimization technology, it offers you instant big cloud and optimal flavor. Moreover, the 1.3-inch full color high-definition TFT screen brings you more convenience, and the user interface supports multiple languages and demonstrates all vaping details. The mod kit supports VW / TC / Smart / CCW / CCT / Bypass Modes to meet your different needs.

Original Vaptio SLEEK Pod System Kit original price $39.99, now only $10.99
The Vaptio SLEEK Kit is a pod system vape kit, which is the first original pod system with magnetic all-metal shell that can automatically adjust airflow based on the air volume the user inhales. The SLEEK Kit is powered by a built-in 400mAh battery with Max. 13W Output, and comes with a 1.5ml E-juice capacity pod. A perfect size as small as a lighter enables you to take along with whenever you want and wherever you go. A built-in detachable tank with generation 4 diatomite ceramic atomizer gives you outstanding performance of strong absorbability, good e-liquid lock and excellent heat conductivity for faster firing and better taste. There are multiple protections that provide you a safe vaping experience like over-vaping protection, over charging protection, etc.

Original Vaptio FRAGG 60 VV VW Mod Kit with Casto Sub Ohm Tank original price $63.99, now only $28.99
The Vaptio FRAGG 60 Mod Vape Starter Kit consists of Vaptio FRAGG 60 VV VW Mod and Casto Sub Ohm Tank. The mod kit is constructed from Zinc Alloy, Plastic, and Leather material, which is powered by a 2000mAh built-in battery with Max. 60W Output for extraordinary direct-to-lung (DTL) vaping, and comes with a 2ml E-juice capacity tank tube, two 0.25ohm mesh coils to meet your all day long vaping. FRAGG 60 has a compact stylish shape, it is equipped with a 0.69-inch OLED display with various modes for better vaping experience and plug-type mesh coil for more handy operation.

Original Vaptio X-HUBBLE 220W VW Mod Kit with APOLO Sub Ohm Tank original price $96.10, now only $44.99
The Vaptio X-HUBBLE 220W VW Mod Vape Starter Kit consists of X-HUBBLE VW Mod and APOLO Sub Ohm Tank. The mod kit is powered by 2 x 18650 Batteries (Not included) with Max. 220W Output. The mod kit comes with a 5ml E-juice capacity tank and two APOLO Coils: APOLO A1 Single Mesh Coil 0.17ohm, 50~70W and APOLO A3 Triple Mesh Coil 0.15ohm, 60~90W to meet your all day long vaping. Equipped with a 2.0-inch TFT Color Screen, the mod kit supports VW / VT / CCW / CCR Bypass Modes.

Original Vaptio AirGo 11W 700mAh Pod System Kit original price $54.99, now only $30.99
The Vaptio AirGo is the world's smallest and lightest open pod system, it is small but powerful. The unique box of AirGo keeps the pods clean and fresh, and perfectly prevents the pods from dust and dirt. The AirGo mod is powered by a 700mAh capacity battery and comes with a 1.5ml E-juice capacity pod, which can charge the mod for 7 times. It can provide 400 puffs with full power, no more worries about running out of battery for a wholr day. The AirGo mod can be fully charged within 5 minutes, it can be vaped for 40~50 puffs (Depends on personal vaping habits). The charging box uses a unique flip-type design, it is delicate and user-friendly. The shaft is stainless steel, and manufactured by Apple's supplier, which can endure up to 100,000 openings and closings. What's more, it can satisfy you with another flavor you like in the spare pod inside charging box.

Replacement Tank Tube for GAS Mods Kree RTA $4.99
The Replacement Tank Tube is designed for GAS Mods Kree RTA as a replacement part, which is made of PCTG material and comes with 2.0ml E-juice capacity. The Tank Tube features high temperature resistance, corrosion resistance, non-toxic, durable, good gloss and transparent like glass.

-------------------
Tips For Self-Protection From Covid-19 >>>

Hygiene products for anti Covid-19 >>>