DS3 Clearomizer s dvojitým atomizer Kit
Cena : 8.70€


DS3 Clearomizer je nový clearomizer s dvojitým vnútri atomizer systému, ktorý môže byť nahradený a viac možností použitia vykurovanie.
Máte možnosť zmeniť systém vykurovania:
- Coilhead vykurovanie
- Cartomizer vykurovanie
- Pre kombinované vykurovanie (coilhead a cartomizer)
 
Žiadne ďalšie zápalné chuť, leakings a obrovské pár výroba.
 
DS3 Kit obsahuje nasledujúce:
1 X DS3 Clearomizer
1 X Coilhead
1 X cartomizer
1 X Coilhead a cartomizer kombinovanej
1 X Ochrana kužeľ s vnútorným závitom
 
 
Špecifikácie:
Dĺžka: 75 mm
Priemer: 20 mm
Kapacita: 5 ml
Vyberateľná double rozprašovač
Puffs: 300-500
Životnosť: 15000 krát
Odolnosť: 2,4 ohm cievka hlava
Závit: eGo/510
Farba: šedá
To môže byť veľmi ľahko rozobrať a vyčistiť.

VV PCCP Kit Power Bank 6600mAh
Cena:37.00€


VV-PCCP Kit je skvelý kit pre vapers. Je neuveriteľné Variabilné napätia zariadenia s multi funkciami. Vedľa môžete nabíjať elektronickú cigaretu, môžete nabíjať ďalšie elektronické zariadenia. Ak máte tento nemusíte už batériu, pretože sa môžete pripojiť na atomizér do banky Power PCCP a môžete vápe dlho, pretože má kapacitu 6600mAh.
 
Táto sada obsahuje nasledujúce:
1 x adaptér s LCD Screen
1 x USB mini nabíjačka
1 x 6600mAh Power Bank
1 x CE4 V2 Clearomizer;
3 x adaptéry nabíjačka hlavy;
eGo prípad.
Použitie je ako elektronické cigarety
Ak chcete používať toto zariadenie ako elektronické cigarety, budete musieť vložiť adaptér LCD v 1A prístave tela PCCP a naskrutkujte atomizér do adaptéra. Akonáhle to urobil potrebné stlačiť tlačidlo napájania z batérie (pccp telo).
Ak chcete zmeniť napätie stlačte tlačidlo na adaptéri až 3 krát. (Modrá = 3,5 Purple = 4.0 V Red = 5,0)
 
Pozor! Nemôžete použiť elektronické cigarety s dvoma odpory, pretože batérie bude blokovať a budete musieť účtovať Power Bank na krátku dobu.
 
Nabíjanie
 
1A a 2A port sú pre nabíjanie.
 
Ak chcete účtovať žiadne ďalšie elektroniku stačí pripojiť kábel USB k 1A alebo 2A portu z batérie a stlačte 3 krát tlačidlo napájania.
Ak chcete nabiť Power Bank použite Mini USB nabíjačka zo sady a pripojte ho k počítaču.
 
1A Port je pre elektronické zariadenia s kapacitou 100-600mAh
2A Port je pre elektronické zariadenia s väčšou kapacitou, než 600mAh
 
Nabíjací elektronika:
 
1 - Pomocou mini USB port pre nabíjanie
2 - Pripojte USB nabíjačka s Power Bank a elektroniky
3 - Kliknite na tlačidlo POWER, 3 krát začať nabíjanie
4 - LED svetlo na Power Bank zmizne pri plnom nabití
 
Funkcia blesku
 
1. Rýchle 3 klikne na tlačidlo začať túto funkciu
2. Stlačením klávesu 1 krát & svetla zapnúť za 1 sekundu
3. Stlačte klávesu znovu a kontrolka zhasne
 
To je skvelý prístroj, ktorý vám umožní vápe na dlhú dobu kvôli kapacite batérie o 6600 mAh a účtovať veľa elektronických zariadení vedľa vašej elektronickej cigarety.

mohol si to radsej nechat v originale, na tomto google preklade sa jeden ide popukat...

mne sa paci ze ma vobec snahu... Iny ani tu snahu nemaju

my likes of me at all effort ... other they have no effort

I am sorry for the language . I thought that would be easy for you to understand .

I will post in english from now .


eGoC Twist Battery 1000 mAh | original Joyetech
Price:19.74€


The latest model of eGo-C battery with variable voltage from 3.2V to 4.8 V .
This battery is original from Joyetech.
You can adjust the voltage by rotating the button from the battery base .The button has 8 steps for adjusting the voltage , each step modifies the voltage by 0.2 V .
The full time charge is about 3 hours and the autonomy of the battery is about 10 hours.You can charge the batteries with eGo/eGo-C/eGo-T chargers.
The selected voltage remains the same until the battery runs out of power , in a limited consumption of 2,5 A.
Specifications:
-Capacity : 1000 mAh
-Sealed agains leakings
-Safety timer : 15 seconds
-Standard charging by socket with Ego/Ego-T/Ego-C charger.
-Length : 121 mm
-Diameter : 14 mm
Avalable colors :
-Black
-Silver

eGo V6 Mod Variable voltage

4V-5V-6V
Price : 39.75€



eGo V6 Mod Variable voltage 4V-5V-6V Stainless steel
The package includes the following :
1 X eGo V6 body variable voltage 4V-5V-6V
2 X 16340 batteries 750 mAh capacity
Specifications :
Length : 105mm
Diameter : 18mm
Thread ( connection ): 510
Material : Stainless steel
Variable Voltage : 4V,5V,6V
5 Click protection system
Constant output voltage
How to use eGo V6 VV mod :
- Insert the two batteries 16340 batteries and red LED will flash 5 times
-The default Output voltage is 4V indicating red light when you smoke.
- Press the FIRE button 5 times continuously in 2 seconds, the LED will light purple 5 times and output voltage will

switch to constant 5V, violet light will light when you smoke.
-Press the FIRE button 5 times continuously in 2 seconds, the blue LED will flash for 5 times and output voltage will

switch to 6V constant blue light will flash when you smoke.
-Press the Fire button 5 times and the mod will turn off . To turn it on press again the Fire Button 5 times .
You can use a variety of clearomizers with the eGo V6 variable voltage MOD such as CE6,CE4+,CE5+, Vivi Nova ,mini Vivi

Nova .
The eGo V6 MOD has 510 thread , so if the clearomizer has ego thread you will need a 510-ego adapter .
To charge 16340 batteries you can use TrustFire TR001 charger .

Vapo V5 Stainless steel mod 14500


Price:22.25€



Vapo V5 Stainless steel electronic cigarette MOD .
This mod is compatible only with 14500 batteries .
The package includes the following :
Body Vapo V5 stainless steel (without battery)
Technical specifications :
Color: Stainless Steel
Thread : eGo/510
Polished surface
Working Voltage: 3.7V
Compatible batteries : 14500 batteries
Length : 102mm
Diameter : 17mm
Weight: 72g

Inawera Flavours


All Flavours are made in Poland by Inawera .
You can use this high quality flavour to make your own e-liquid . It is recommended to mix it with Inawera no flavour bases .
One advantage would be that you will save some money in this way .
All our flavours have been especially selected for vaping.
All ingredients have been laboratory tested and certified.
Our bottles are resistant to all kinds of agressive liquids.
We recommend to add 4-5 drops of flavour to 10 ml of base . If the new mixture is not strong enough add 1-2 more drops of E-Flavour .
We also recommend to leave the mixture 24 hours , to give time to the base to fully absorb de E-flavour .


E-FLAVOUR Inawera - black currants - 5ml
E-FLAVOUR Inawera - Brandy - 5ml
E-FLAVOUR Inawera - cherries in liqueur - 5ml
E-FLAVOUR Inawera - Cherry - 5ml
E-FLAVOUR Inawera - Coffee Paradise - 5ml
E-FLAVOUR Inawera - Mocca - 5ml
E-FLAVOUR Inawera - Orange tobacco - 5ml
E-FLAVOUR Inawera - Rose - 5ml
E-FLAVOUR Inawera TABACCO - Black Cherry - 5ml
E-FLAVOUR Inawera TOBACCO - American Type - 5ml
E-FLAVOUR Inawera TOBACCO - Canadian Type - 5ml
E-FLAVOUR Inawera TOBACCO - Hot Spices - 5ml
E-FLAVOUR Inawera TOBACCO - Menthol - 5ml
E-FLAVOUR Inawera- Cappuccino - 5ml
E-FLAVOUR TOBACCO - Cappuccino - 5ml


Inawera bases

Original base made by Inawera in Poland
All ingredients have been laboratory tested and certified .
It can be consumed on its own or can be combined with various inawera flavours .
If you combine with different flavors, resulting liquid must be left for at least 24 hours to absorb the flavor .

Inawera - Dirty Neutral Base - nicotine 0 mg/ml 100 ml
Inawera - Dirty Neutral Base - nicotine 12 mg/ml 100 ml
Inawera - Dirty Neutral Base - nicotine 18 mg/ml 100 ml
Inawera - Dirty Neutral Base - nicotine 24 mg/ml 100 ml
Inawera - Dirty Neutral Base - nicotine 36 mg/ml 100 ml
Inawera - Dirty Neutral Base - nicotine 6 mg/ml 100 ml
Inawera - VPG Smoke Power Base - nicotine 0 mg/ml 100 ml
Inawera - VPG Smoke Power Base - nicotine 12 mg/ml 100 ml
Inawera - VPG Smoke Power Base - nicotine 18 mg/ml 100 ml
Inawera - VPG Smoke Power Base - nicotine 26 mg/ml 100 ml
Inawera - VPG Smoke Power Base - nicotine 36 mg/ml 100 ml
Inawera - VPG Smoke Power Base - nicotine 6 mg/ml 100 ml
Inawera 2D Fresh Mint Base - nicotine 0 mg/ml 100 ml
Inawera 2D Fresh Mint Base - nicotine 12 mg/ml 100 ml
Inawera 2D Fresh Mint Base - nicotine 18 mg/ml 100 ml
Inawera 2D Fresh Mint Base - nicotine 24 mg/ml 100 ml
Inawera 2D Fresh Mint Base - nicotine 6 mg/ml 100 ml
Inawera PG Eco Base - nicotine 12 mg/ml 100 ml
Inawera PG Eco Base - nicotine 18 mg/ml 100 ml
Inawera PG Eco Base - nicotine 26 mg/ml 100 ml
Inawera PG Eco Base - nicotine 38 mg/ml 100 ml
Inawera PG Eco Base - nicotine 6 mg/ml 100 ml
Inawera VG Biobase - nicotine 0 mg/ml 100 ml
Inawera VG Biobase - nicotine 12 mg/ml 100 ml
Inawera VG Biobase - nicotine 18 mg/ml 100 ml
Inawera VG Biobase - nicotine 26 mg/ml 100 ml
Inawera VG Biobase - nicotine 36 mg/ml 100 ml
Inawera VG Biobase - nicotine 6 mg/ml 100 ml

GLO - 2 Electronic Cigarettes Kit
Price:24.70€
35 % DISCOUNT



GLO Electronic Cigarette is made by Sailebao company and is a new model released in 2012 .It has a unique design and

produces a huge quantity of vapours and an excelent TH because of the cartomizer .The cartomizer is very durable and it is a

high quality product .
Practically you don't feel any difference from a tradition cigarette when you use this e-cig .
Inside Glo Cartomizer there is a blue LED which allows you to view the vaporization process
This cartomizer is compatible with the following batteries :
TGO with 901 connection
eGo with 510 connection
The kit includes the following :
2 X eGo Batteries 900 mAh with on/off functions , black button and silver ring
2 X GLO Cartomizers
1 X USB Charger
1 X USB adapter - 220V outlet
2 X Mouthpieces
Specifications :
Length : 140 mm
Diameter : 14 mm
Weight : 46,5 g
Battery capacity : 900 mAh
Voltage : 3.3V-4.2V
Fully charged battery produces 1000 puffs .
Lifetime : 300 charges
Cartomizers produces ~160 pufs, ~ 9 traditional cigarettes

Kit Lavatube 4.0 aka EpicStorm / Lambo

Price:67.25€



Lavatube kit 4.0 is an unltimate generation product , easy to use , both for beginers and experienced users .
The kit contains the following :
Lavatube body 4.0 made of Chrome
High Voltage Atomizer
Two Lavatube batteries 18650 with a capacity of 1800 mAh each .
One TrustFire TR002 Charger
Chromed Drip Tip
Case
Manul with instructions
The voltage can be adjusted between 3 V and 6 V with 0,1 V .
The adjustment can be made by pressing "+" and "-" buttons to increase or decrease the voltage with 0.1 V .To lock the voltage at a specific value you need to keep pressed both buttons 5 seconds . To unlock the voltage you need to do the same .
Features
Compatible with almost all atomizers and cartomizers.
It can take low resistance atomizer's from: 1.0-5.0ohms
ego and 510 connection
Length : 130 mm
Diameter : 22 mm
Brand : L-Rider
Model : EpicStorm Lambo v4
Certificates : CE,RoHS,UL,UN38.3
Made from Chrome .
The Lavatube Body has an LCD screen which shows the voltage and the remaining power of the battery .
Has the ability to check the battery voltage
Support and maximum 9amps out put current.


Protections :

Protected agains over-heating
Protected against short-circuit
Protected agains battery inversion
Tension protection
Hole for gas evacuation

It has 4 buttons on the exterior housing of the Electronic Cigarette
-Power button (Red)
-Fire button
-2 buttones to adjust the voltage(+ and -)
Power button ( Red )
-It has 5 click protection function ,wich means you need to push 5 times the button in 2 seconds to turn on/off the battery.
Fire button
-After you turn on the battery , by pressing this button you will turn on the atomizer at the voltage you had set.
+ and - Buttons
-Are used to adjust the voltage by 0,1 V. If yiu reach at 6 V and press "+" the voltage will be 3 V.
The LCD Screen is easy to use and it indicate the voltage you had set.
In addition the Lavatube corp has a "block" function , which blocks the voltage level to a certain value, eliminating the risk of changing the voltage from mistake.To lock or unlock the voltage voltage you must press the "+" and "-" simultaneously for 5 seconds.
Lavatube also has a voltage regulator output which will always send the same flow of current to atomizer whether the battery is fully charged or almost flat, so you can enjoy the same quantity of vapors always.

To protect from overheating , if you hold down the fire button pressed for 10 seconds without a break the power supply will automatically switch off,until you don't press anymore the power button

If you put the battery reverse the protection system will not let you to turn on. Lavatube will switch off also when the battery is almost empty.

Lavatube has a built-in voltmeter that allows you to view the battery voltage by pressing the red button 7 times. Thus for a few seconds you will see how much time you can use before you need to charge the battery.During the battery life the battery voltage will drop from 4.2 V to 3.3 V. The LCD will flash when the battery needs to be recharged and stop automatically when is no longer current, when it reaches to 3.3 V. We do not recomand to use the battery unitil it reaches to 3.3 V beacause the lifetime of the battery will be shorter.
In case of detecting any excess current higher than 2.5 A , the unit will shout down automatically,to avoid possible damages.

One more security measure is the ventilation hole situated at the bottom of the corp , to avoid the potential unpredictable behavior of lithium-ion batteries.