Elektronická cigareta | Vaping Fórum

SXK Avat MTL/DL RTA Clone with Spare 5.0ml Top Cap Tank Tube $23.99
The SXK Avat MTL/DL RTA Rebuildable Tank Vape Atomizer Clone is constructed from 316 Stainless Steel (body) and PEI (tank tube) in 22mm Diameter. The RTA comes with a 3.4ml E-juice capacity tank tube and a SS drip tip. And it supports MTL and DL vaping experience, bottom airflow control and top-filling system. The RTA comes with a spare 5.0ml E-juice capacity PEI top cap tank tube for a larger capacity.

YFTK ParavozZ Ghost V2 RDTA Clone $25.99
The YFTK ParavozZ Ghost V2 RDTA Clone is constructed from 316 stainless steel material in 22mm diameter. The RDTA comes with a PEI tank tube. The building deck supports single coil. Heat sinks in the top cap is good for better cooling.

YFTK ParavozZ Ghost V2 RDTA Clone - Titanium Alloy $50.99
The YFTK ParavozZ Ghost V2 RDTA Clone is constructed from Titanium Alloy material in 22mm diameter. The RDTA comes with a PEI tank tube. The building deck supports single coil. Heat sinks in the top cap is good for better cooling.

Original Yuoto K40W Pod System Kit $29.98
The Yuoto K40W VW Box Mod Pod System Vape Starter Kit is an ergonomically designed compact all-in-one Pod System Device. Comfortable hand feels pretty, and exquisite appearance. Yuoto K40W Mod Pod Kit is constructed from durable Zinc Alloy and safe and hygienic PCTG material, with various stickers to meet the individual needs of different vapers. It is equipped with a 0.96-inch LCD Screen with highlight square AXON chip and it is powered by a 1500mAh built-in battery with adjustable power up to 40W, better to fit well with your taste preference and re-charging via a micro USB port. If you are a fresh hand to mod or user unfamiliar with adjusting power, it is highly recommended for you to choose K40W Mod Pod Kit. K40W Mod Pod Kit comes with two types of coil for options: 0.8ohm Regular Coil and 0.3ohm Mesh Coil. Furthermore, it has a 3.5ml E-juice capacity pod with refilled from the bottom to meet your all day long vaping. The intelligent chip inside enables it to smartly recognize coils and automatically match the power, to a large extent avoiding coils being burned out. Smoothening your vaping with both automatic and manual dual start modes, multiple safety guarding, and intelligent power adaptation to the coil inserted. In addition, it is also compatible with VOOPOO PnP Coils (0.3ohm, 0.8ohm 1.2ohm coil) fully suitable for various needs of vapers. (VOOPOO PnP Coils are not included, Sold Separately).

Original FreeMax Autopod50 Pod System Kit $41.99
The Autopod50 VW Box Mod Pod System Vape Starter Kit is the World's First Double Mesh Coil Mod Pod Kit with everything you need for vaping between 15W to 50W. Autopod50 Mod Pod Kit utilizes quality material for comfortable hand feeling and durability. Autopod50 is powered by a 2000mAh built-in battery with Max Output 50W, it comes with a 4ml pod cartridge and two types of coils for options: 0.25ohm AX2 Mesh Coil (30~50W) and 0.5ohm AX2 Mesh Coil (15~35W), all of which can bring you long-lasting vaping experience. As it is famous for the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala, it is able to provide best vaping experience even better than the best sub ohm tanks in the market. According to multiple testing results, the AX2 Mesh Coil has an average life span of 30~40 refillings. What's more, with Type-C 2A fast charging function, it only takes 80 minutes to be fully charged. And it allows you to get vaping details via a screen.

Multifunctional Vape Tweezers Tool for RDA / RTA / RDTA Vape Atomizer $2.99
The Multifunction vaper Tweezers is your handy tool for rebuilding your coils. It's tip is made of ceramic, which is able to withstand the high temperature when you dry fire your coil. With this tool, you can tighten the wire, pull out the top cap, pull out the base & pull out the coils easily. Making coil building so much easier. It's a great and handle tool if you are into rebuildable atomizers.

Original Yuoto K40W Pod System Vape Kit Replacement Empty Pod Cartridge(3 PCS) $6.99
The Yuoto K40W Replacement Pod Cartridge is designed for Yuoto K40W Pod System Vape Kit as a replacement part, which is made of PCTG material and features 3.5ml E-juice refillable capacity and is refilled from the bottom, delivering the delicious flavor that will liven anyone's day. It is compatible with VOOPOO VINCI PnP Coils: 0.3ohm, 0.8ohm, and 1.2ohm. (Coils are not included, Sold Separetely), it will offer you more choices and richer taste experiences. Installed in a bottom plug ' n' play fashion. Easy to replace the coil. 3 PCS / Pack.

Original Yuoto K40W Pod System Vape Kit / Cartridge Replacement Mesh Coil Head(3 PCS) $8.99
The Yuoto K40W Replacement Mesh Coil Head is designed for Yuoto K40W Pod System Vape Kit as a replacement part, which features 0.3ohm coil resistance. With this mesh core, you've got more surface area and more metal to actually heat up your E-liquid. 3 PCS / Pack.

Original Yuoto K40W Pod System Vape Kit / Cartridge Replacement Regular Coil Head(3 PCS) $8.99
The Yuoto K40W Replacement Regular Coil Head is designed for Yuoto K40W Pod System Vape Kit as a replacement part, which features 0.8ohm coil resistance. With this mesh core, you've got more surface area and more metal to actually heat up your E-liquid. 3 PCS / Pack.

Original Yuoto K40W Pod System Vape Kit / Cartridge Replacement Coil Head(3 PCS) $8.99
The Yuoto K40W Replacement Coil Head is designed for Yuoto K40W Pod System Vape Kit as a replacement part, which features 1.2ohm coil resistance. With this mesh core, you've got more surface area and more metal to actually heat up your E-liquid. 3 PCS / Pack.

YFTK Replacement Tank Tube for ParavozZ Ghost V2 RDTA $2.99
The YFTK Replacement Tank Tube is designed for ParavozZ Ghost V2 RDTA as a replacement part. It is made of PC material.

-------------------
3% OFF for No Tobacco Day
Time: 29th May 00:00 - 31st May 2020 23:59 (UTC-6 / Denver Time)
Coupon code：3FVAPE2020
Note: This offer is not stackable with other MAP discounts.

Original IJOY Captain 2 180W Box Mod $59.99
The IJOY Captain 2 Vape Box Mod continues the amazing design and performance of the Captain series of mods. IJOY Captain 2 Box Mod is constructed from durable and lightweight Aluminum Alloy with ergonomic dimensions. Captain 2 Mod is powered by dual 18650 batteries (Not included) and has a maximum wattage of 180 watts. It has ample power and a large number of functions to bring incredible experience. In addition, IJOY Captain 2 Mod is equipped with a new 0.96-inch full-color display, which can provide more detailed working data. On the control face, you can see an oversized fire button and an ergonomic grip underneath. The IJOY Captain 2 Mod is Dust and Shock Proof, durable. The various protection systems ensure a safe vaping environment. It can perfectly match the IJOY Captain V Tank. (Not included).

Original BP Mods Pioneer MTL / DL RTA $59.99
The BP Mods Pioneer RTA is constructed from Stainless Steel (body) and PC (tank tube) in 22mm Diameter. Pioneer RTA comes with innovative airflow design, it supports fantastic MTL vaping experience and Restricted DL vaping. (Extension Pack is Not included). The RTA also comes with a 3.7ml E-juice capacity PC tank tube for your daily vaping. Furthermore, there are two types of spare Drip Tips and Tank Tubes for options: 1 x Ultem Drip Tip, 1 x Clear Drip Tip; 1 x Ultem Tank Tube, and 1 x PCTG Tank Tube. You can choose different drip tip or tube for your RTA as you like. Moreover, there are three Airflow Control Pins that meet your different airflow adjustable needs.

Vapeasy Armor Engine RDA Clone with BF Pin - Black, 316 Stainless Steel, Without Logo $14.59
Vapeasy Armor Engine RDA Rebuildable Dripping Atomizer Clone is constructed from 316 stainless steel and with replaceable Delrin 510 drip tip. This RDA is with dual-pole for single coil building. The Vapeasy Armor Engine RDA Clone supports airflow adjustable control via the top cap. This RDA comes with bottom feeder / BF / Squonk Pin. This RDA without Logo.

Vapeasy Armor Engine RDA Clone with BF Pin - Silver, Titanium Alloy, Without Logo $14.99
Vapeasy Armor Engine RDA Rebuildable Dripping Atomizer Clone is constructed from Titanium Alloy and with replaceable Delrin 510 drip tip. This RDA is with dual-pole for single coil building. The Vapeasy Armor Engine RDA Clone supports airflow adjustable control via the top cap. This RDA comes with bottom feeder / BF / Squonk Pin. This RDA without Logo.

Original Hotcig Marvel AIO Mod Pod Kit $25.99
The Hotcig Marvel 40W VW Box Mod AIO Pod System Vape Starter Kit is the latest device from Hotcig. Marvel 40 Mod Pod Kit is powered by built-in 1200mAh battery with Max. output 40W. The Hotcig Marvel has adjustable airflow system, so you are capable of vaping juice up to 60VG. The Hotcig Marvel is compatible with both MTL and DL vape. Moreover, the meshed coil of Hotcig Marvel Kit provides pure taste to the users too. The Marvel 40 Kit comes with a 2ml E-juice capacity cartridge and 0.4ohm resistance coil for your daily vaping.

Original FreeMax Autopod50 Mod Pod Kit / Cartridge Replacement AX2 Mesh Coil Head(5 PCS) $14.99
The Autopod50 Mesh Coil is designed for Freemax Autopod50 Mod Pod Kit. Upgraded from world-known M Pro and Fireluke series, it is known as the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala that is able to provide best vaping experience even better than the best sub ohm tanks in the market. The Autopod50 AX2 Mesh Coil features 0.25ohm coil resistance and power output range from 30W to 50W. Moreover, based on testing results, the AX2 Mesh Coil has an average life span of 30~40 refillings. 5 PCS / Pack.

Original FreeMax Autopod50 Mod Pod Kit / Cartridge Replacement AX2 Mesh Coil Head(5 PCS) $14.99
The Autopod50 Mesh Coil is designed for Freemax Autopod50 Mod Pod Kit. Upgraded from world-known M Pro and Fireluke series, it is known as the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala that is able to provide best vaping experience even better than the best sub ohm tanks in the market. The Autopod50 AX2 Mesh Coil features 0.5ohm coil resistance and power output range from 15W to 35W. Moreover, based on testing results, the AX2 Mesh Coil has an average life span of 30~40 refillings. 5 PCS / Pack.

Original FreeMax Autopod50 Mod Pod Kit Replacement Pod Cartridge with 0.25ohm AX2 Mesh Coil Head(1 PC) $6.99
The Autopod50 Pod Cartridge is designed for Freemax Autopod50 Mod Pod Kit. And it comes with AX2 Mesh Coil 0.25ohm (30~50W). As it is famous for the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala, it is able to provide best vaping experience even better than the best sub ohm tanks in the market. And based on multiple testing results, the AX2 Mesh Coil has an average life span of 30~40 refillings. Moreover, it adopts 4ml large e-juice capacity design that will greatly reduce the refilling times.

Original FreeMax Autopod50 Mod Pod Kit Replacement Pod Cartridge with 0.5ohm AX2 Mesh Coil Head(1 PC) $6.99
The Autopod50 Pod Cartridge is designed for Freemax Autopod50 Mod Pod Kit. And it comes with AX2 Mesh Coil 0.5ohm (15~35W). As it is famous for the lastest COILTECH 4.0 with military grade SS904L mesh and Tea Fiber Cotton formala, it is able to provide best vaping experience even better than the best sub ohm tanks in the market. And based on multiple testing results, the AX2 Mesh Coil has an average life span of 30~40 refillings. Moreover, it adopts 4ml large e-juice capacity design that will greatly reduce the refilling times.

SXK Replacement Colorful Button Set Kit for BB 70W / DNA 60W Box Mod Kit Clone(16 PCS) original price $9.90, now only $7.99
The SXK Replacement Colorful Button Set Kit is suitable for SXK BB 70W / DNA 60W Box Mod Kit. They are used as replacement parts to make your BB box mod look nice. The Brown Color Button is made of PEI material, Transparent Color Button is made of PC material, the others (purple / green / blue / yellow / white / red) are made of ABS material.The Kit includes 16 PCS Colorful Buttons. 16 PCS / Pack.

Original Hellvape Dead Rabbit RTA Replacement Bubble Tank Tube $2.59
The Replacement Bubble Tank Tube is designed for Hellvape Dead Rabbit RTA as a replacement part, it is made of Glass material and comes with 4.5ml E-juice capacity.

Protective Case Sleeve for 18650 Battery $0.99
The protective sleeve is made from soft silicone to protect your 18650 battery.

-------------------
Products with 24HRS tag can be shipped in 24hrs after payment confirmed on business day.

If you want to order 24HRS item directly,click on this link to purchase >>>

YFTK Across Vape Roulette MTL/DL RTA Clone $27.99
The YFTK Across Vape Roulette RTA Clone is constructed from 316 Stainless Steel in 22mm Diameter. The RTA supports MTL vaping and DL vaping, which comes with a 3.5ml E-juice capacity tank tube with top refilling and juice control by rotation of the drip tip base. What's more, the RTA also comes with two air roulettes. one for MTL and the other for DL. It is to change the air hole settings via rotating the air Roulette.

Original Steam Crave Aromamizer Titan RDTA Replacement Straight Tank Tube(2 PCS) $3.59
The Steam Crave Replacement Straight Tank Tube is designed for Steam Crave Aromamizer Titan RDTA as a replacement part, which is made of Glass and features 18ml E-juice capacity. 2 PCS / Pack.

Original Steam Crave Aromamizer Titan RDTA Replacement Straight Tank Tube(2 PCS) $3.69
The Steam Crave Replacement Straight Tank Tube is designed for Steam Crave Aromamizer Titan RDTA as a replacement part, which is made of Glass and features 28ml E-juice capacity. 2 PCS / Pack.

Original Steam Crave Aromamizer Titan RDTA Replacement Dual Series Mesh Deck(1 PC) $21.99
The Steam Crave Replacement Dual Series Mesh Deck is designed for Steam Crave Aromamizer Titan RDTA as a replacement to build dual mesh coils for smooth flavor.

Original Steam Crave Aromamizer Titan RDTA Replacement LEGO Deck(1 PC) $20.19
The Steam Crave Replacement LEGO Deck is designed for Steam Crave Aromamizer Titan RDTA as a replacement for great flavor.

-------------------
Products with 24HRS tag can be shipped in 24hrs after payment confirmed on business day.

If you want to order 24HRS item directly,click on this link to purchase >>>

Taifun BT RTA Clone original price $20.99, now only $7.99
The Taifun BT RTA Clone is made from stainless steel and glass in 23mm diameter and holds 5ml capacity. The Taifun BT style RTA does not use traditional coils with wires but unbelievable durable stainless steel mesh with an extra-large surface for a brand new vaping experience, massive vapor clouds and flavor beyond words. The vapor and still the e-liquid and atomizer itself stay comfortably cool as the stainless steel mesh heatens very fast but cool down immediately, too. The top-filling system mesh cotton coil atomizer, an absolute premium class atomizer, is as expected build on highest quality standards in order to produce a high-satisfying device for an overwhelming vaping experience.Please Note: This RTA is without LOGO.

Original Advken Potento 560mAh Pod System Kit $25.99
The Advken Potento Pod System Vape Starter Kit is a new pod kit with a voltage adjustable knob, which is powered by a built-in 560mAh battery. Rotate the bottom potentiometer control knob to adjust voltage from 3.2V to 4.2V for most flawless flavor and effortless vapor. As for Advken Potento pod, it is made of PCTG material, comes with 1.2ohm resistance coil and 2.5ml E-juice capacity with side filling design.

Original Steam Crave Replacement Mesh Strips for Aromamizer Titan RDTA(10 PCS) $3.90
The Steam Crave Replacement Mesh Strips is suitable for Steam Crave Aromamizer Titan RDTA, which is made of Kanthal A1 material and features 0.15ohm resistance. (0.15 +/- 0.03ohm) 10 PCS / Pack.

Original Steam Crave Replacement Mesh Strips for Aromamizer Titan RDTA(10 PCS) $3.90
The Steam Crave Replacement Mesh Strips is suitable for Steam Crave Aromamizer Titan RDTA, which is made of SS316L material and features 0.15ohm resistance. (0.15 +/- 0.03ohm) 10 PCS / Pack.

510 to eGo Threading Adapter Convertor for E-Cigarette / Vape Box Mod Kit $0.99
The 510 to eGo Threading Connector adapter is made of Copper material. With the adapter, you can change a 510 threading to an eGo threading or change an eGo threading to a 510 threading easily.

Original Advken Potento Pod System Vape Kit Replacement Cartridge with 1.2ohm Cotton Coil(3 PCS) $10.99
The Advken Potento Replacement Pod Cartridge is designed for Advken Potento Pod System Vape Starter Kit, which is made of PCTG material, comes with 1.2ohm cotton coil and 2.5ml E-juice capacity with side filling design.

SXK Fire Button + Screen Plate + Button Plate Set for SXK BB 60W / 70W Vape Box Mod Kit(3 PCS) original price $25.90, now only $22.99
This SXK replacement accessories set are made of 316 Stainless Steel, which are suitable for SXK BB Bantam BB 60W / 70W box mod kit. This set includes Fire SXK Button + Screen Plate + Button Plate Set. The Fire Button is 13mm diameter, Screen Plate is 37 x 28mm, and the Button Plate is 52 x 27mm.

Original ThunderHead Creations THC Tauren Hybrid Semi-Mechanical Vape Mech Mod with X Chip $99.90
The THC Tauren Hybrid Semi-Mechanical Mod is constructed of Naval Standard Brass with 26mm diameter and tapers to 24mm. Equipped with the Proprietary-X-Chip (Removable), the Tauren Hybrid Mod is the first Smart Hybrid Mech Mod. There are multiple protections that ensure your vaping safety such as short-circuit protection, high-temperature protection, low-voltage protection, 10 seconds cut-off protection. The Tauren Hybrid Mod is powered by single 18650 / 20700 / 21700 battery (Battery is not included, the 18650 Adaptor is included). and it features a unique ball construction with constant contact design. Caution: Do not Use Extension Tube with X Chip (Not included, Sold Separately).

Original ThunderHead Creations THC Tauren Max Hybrid Semi-Mechanical Vape Mech Mod with X Chipest $142.00
The THC Tauren Max Hybrid Semi-Mechanical Mod is constructed of Naval Standard Brass with 26mm diameter and tapers to 24mm. Equipped with the Proprietary-X-Chip (Removable), the Tauren Max Hybrid Mod is the first Smart Hybrid Mech Mod. There are multiple protections that ensure your vaping safety such as short-circuit protection, high-temperature protection, low-voltage protection, 10 seconds cut-off protection. The Tauren Hybrid Mod is powered by single 18650 / 20700 / 21700 battery (Battery is not included, the 18650 Adaptor is included). and it features a unique ball construction with constant contact design. Caution: Do not Use Extension Tube with X Chip (Not included, Sold Separately).

Original Vape Master Hunter Pro 220W Box Mod original price $39.99, now only $14.99
The Vape Master Hunter Pro TC VW Box Mod is powered by 2 x 18650 batteries (Not included) with Max. Output 220W. The Box Mod supports SmartVW (H / N / S), CCW, CCT, VT (NI, TI, SS), T-CR (M1, M2), RCT, BYPASS Modes. The temperature control range from 100'C to 315'C / 200'F to 600'F. Equipped with a 0.96-inch OLED Screen, it can display the data of this device clearly.

Original Vape Master Aurora RTA original price $20.99, now only $6.99
The Vape Master Aurora RTA is constructed from Stainless Steel and Glass in 22mm diameter. The RTA comes with a dual post build deck design and supports top filling system and bottom airflow control.

Original OXVA Origin 40W AIO Pod System Kit $34.99
The Oxva Origin VW Mod Pod System Kit is powered by a single 18650 battery (Not included) with 40W Max. output, which is a sleek, compact kit with an unusual shape. The included UNI coils are designed to release the liquid's flavor to its maximum and you could enjoy the different vaping experiences through both the DTL sub-ohm mesh coil and MTL coils. Note: The airflow ring pre-installed in the kit is reusable. Please keep it for a new coil.

SXK Billet Box 70W All-in-One VW Box Mod Kit Clone with USB Port $75.00
The SXK BB Box Mod Kit Clone is constructed from aluminum with an all-in-one design. This mod comes with Kanger Subtank RBA Coil, Kanger OCC coil adaptor, Nautilus coil adaptor. The SXK Mission Style Replacement Switch + Back & Front Panel Kit can be used in the mod kit (Not included, Sold Separately). This BB Box comes with USB port for charging only. With Logo.

Original ThunderHead Creations THC Tauren Hybrid / Tauren Max Mech Mod Replacement Extension Tube $29.00
The ThunderHead Creations THC Tauren Extension Tube is designed for Tauren Mech Mod / Tauren Max Mech Mod as a replacement part to extent the battery tube, which is made of Brass material. Compatible with 18650 / 20700 / 21700 Batteries (with 18650 adapter, batteries not included)Caution: Do not Use Extension Tube with X Chip.

Original ThunderHead Creations THC Tauren X 2-in-1 Chip for Tauren Mech Mod / Tauren Max Mech Mod(1 PC) $26.00
The ThunderHead Creations THC Tauren X 2-in-1 Chip is the world's 2 in 1 and removable design chipset. It can control the power output based on the current battery state and supports mech mode and smart protection mode. The Tauren X Chip is compatible with Tauren Mod and Tauren Max Mod. Note: It cannot be used together with the THC Extension Tube.

Original OXVA Origin Pod System Kit Replacement Empty Pod Cartridge(2 PCS) $4.59
The OXVA Origin Replacement Empty Pod Cartridge is designed for OXVA Origin Pod System Vape Kit as a replacement part, which comes with 2ml E-juice capacity. 2 PCS / Pack.

Original OXVA X Pod System Kit Replacement Empty Pod Cartridge(2 PCS) $3.99
The OXVA X Replacement Empty Pod Cartridge is designed for OXVA X Pod System Vape Kit as a replacement part, which comes with 2ml E-juice capacity. 2 PCS / Pack.

Original OXVA UNI Replacement RBA Coil Head for OXVA Origin / OXVA X Pod System Kit(1 PC) $5.99
The OXVA UNI Replacement RBA Coil Head is compatible with OXVA X Pod System Vape Kit / OXVA Origin Pod System Vape Kit as a replacement part. The RBA Coil fits for DIY vaping lovers.

Original OXVA UNI Replacement Coil Head for OXVA Origin / OXVA X Pod System Kit(5 PCS) $10.99
The OXVA UNI Replacement Coil Head is compatible with OXVA X Pod System Vape Kit / OXVA Origin Pod System Vape Kit as a replacement part, which is made of Kanthal A1 material and features 1.0ohm coil resistance. 5 PCS / Pack.

Original Cthulhu Hastur 88W Box Mod $85.00
The Cthulhu Hastur 88W TC VW Vape Box Mod with simple and elegant appearance is made of 304 food-grade steel bat tery tube and aviation aluminum with high quality cnc machining technology, which is powered by single 18650 battery with 88W Max. Output Power. (Battery is not included). The Cthulhu Hastur Mod is equipped with Atom chip inside which provides temperature control and adjustable power system. Featuring clear color OLED screen and easy side button design, the Cthulhu Hastur Mod will bring you a simple and powerful vaping.

Original League of Scoundrels CONSVR Mechanical Mod original price $139.99, now only $35.99
The Original League of Scoundrels CONSVR Mechanical Mod is constructed from Copper material, it is perfect for everyday use with a look that definitely catches the eye. The mod utilizes an adjustable top insulated floating pin whilst the bottom contact is insulated and adjustable to accommodate any 18650 variation.

Original asMODus Rose Finch Mechanical Mod original price $39.90, now only $25.99
The asMODus Rose Finch vape mechanical mod, is constructed from Brass material featuring 24.5mm diameter. The firing switch is powered by high quality Earth magnets. It is powered by a single 18650 battery (Not included). Moreover, the Rose Finch features floating top pin for easy accommodation and switching of atomizers.

Original Phevanda Memory MTL RTA $32.99
The Phevanda Memory MTL RTA is constructed from 316 Stainless Steel and PC material in 22mm diameter, which comes with a 3.5ml E-juice capacity and 510 pin to adjust airflow (1.0mm / 1.3mm / 1.6mm). The RTA supports bottom airflow control and top filling system. It is easy to separate the chimney and deck for building your coil. You can also turn the chimney to Close / Open the E-juice Flow (liquid control. The Phevanda Memory RTA supports MTL vaping experience.

Original Aspire Cloudflask 2000mAh DTL Pod System Kit $34.99
The Aspire Cloudflask is powered by 2000mAh built-in battery, it brings big cloud vaping performance in a compact and sleek sub-ohm replaceable coil pod system configuration. Designed to help new converts start their journey and experienced vapers travel easily, with fast access to big flavor and instant cloud action. Engineered from premium Stainless Steel, with a versatile range of microfiber leather cases in various colors, the Aspire Cloudflask provides a sleek and stylish look. The removable leather strap assists with easy carry. The Cloudflask is an easy to use Pod System, which is designed for those who enjoy restricted DTL (Direct To Lung) vaping experience. The ergonomic design makes it feel great in hand, and simple structure allows to operate very easily. The 0.25ohm Mesh Coil will provide extreme flavor similar to Aspire Atantis tank.

Original SMOKTech SMOK Nfix Pod System Kit(Standard Edition) $24.99
The SMOKTech SMOK Nfix VW Mod Pod System Vape Starter Kit is the perfect portable all-in-one pod vape, which is a good combination of simple design and superb technology. With the slim portable design and easy to carry to anywhere. Powered by a built-in 700mAh battery, Nfix can support a daily use for heavy users. Get rid of frequent charging and focus on your everyday vaping as you want. Nfix with Type-C interface for fast charging. Type-C charging can deliver reliable power and provide faster transfer speed, which makes recharging easier. It takes only 60 minutes to fully charge the battery, which is efficient and saves time to do more. Nfix Kit support max 25W output, it comes with two 3ml E-juice capacity pod and dual-coil 0.8ohm MTL Coil to meet your all day long vape, designed to deliver the best flavor for the MTL vaping mode. What's more, Nfix allows you to access all basic vaping data through a 0.69-inch OLED screen. It also has multiple protections to ensure vaping safety.

[Ships from Battery Warehouse] Original Listman IMR20700 4200mAh 30A Flat Top Li-ion Battery for Vape Mod / Mod Kit (2 PCS) $14.99
The Listman IMR20700 battery is a 4200mAh high performance rechargeable flat top li-ion battery and made for high continuous discharge current (Max 30A) applications. It is compatible with any E-cig vape box mods / mod kit powered by 20700 batteies. 2 PCS / Pack.

Original Listman X2 1A Dual-Slot Charger for 18650 / 17670 / 17500 / 17350 / 16340 (RCR123) / 10440 Batteries, etc. - AU Plug $8.99
The Listman X2 1A Charger is compatible with different kinds and sizes of most batteries like IMR / Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17350, 116340(RCR123), 14500, 10440; Ni-MH(Ni-Cd): AA, AAA, AAAA, C. The Operation Temperature of X2 1A Charger are range from 0'C to 40'C. This is AU Plug

Original Listman X2 1A Dual-Slot Charger for 18650 / 17670 / 17500 / 17350 / 16340 (RCR123) / 10440 Batteries, etc. - Euro Plug $8.99
The Listman X2 1A Charger is compatible with different kinds and sizes of most batteries like IMR / Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17350, 116340(RCR123), 14500, 10440; Ni-MH(Ni-Cd): AA, AAA, AAAA, C. The Operation Temperature of X2 1A Charger are range from 0'C to 40'C. This is Euro Plug

Original Listman X2 1A Dual-Slot Charger for 18650 / 17670 / 17500 / 17350 / 16340 (RCR123) / 10440 Batteries, etc. - UK Plug $8.99
The Listman X2 1A Charger is compatible with different kinds and sizes of most batteries like IMR / Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17350, 116340(RCR123), 14500, 10440; Ni-MH(Ni-Cd): AA, AAA, AAAA, C. The Operation Temperature of X2 1A Charger are range from 0'C to 40'C. This is UK Plug

Original Listman X2 1A Dual-Slot Charger for 18650 / 17670 / 17500 / 17350 / 16340 (RCR123) / 10440 Batteries, etc. - US Plug $8.99
The Listman X2 1A Charger is compatible with different kinds and sizes of most batteries like IMR / Li-ion: 26650, 22650, 18650, 17670, 18490, 17500, 17350, 116340(RCR123), 14500, 10440; Ni-MH(Ni-Cd): AA, AAA, AAAA, C. The Operation Temperature of X2 1A Charger are range from 0'C to 40'C. This is US Plug

Original Listman F2 2A Dual-Slot Charger for 22650 / 18650 / 14500 / 18350 / 14650 / 18500 / 16340 / 17500/18700 - ABS, AU Plug $6.99
The Listman F2 2A Charger is compatible with Li-ion: 26650, 22650, 18650, 14500, 18350, 14650, 18500, 16340, 17500, 18700 Batteries. The Operation Temperature of F2 2A Charger are range from 0'C to 40'C. The LED indicator can show you if the batteries are full or not. This is AU Plug

Original Listman F2 2A Dual-Slot Charger for 22650 / 18650 / 14500 / 18350 / 14650 / 18500 / 16340/17500/18700 - ABS, Euro Plug $6.99
The Listman F2 2A Charger is compatible with Li-ion: 26650, 22650, 18650, 14500, 18350, 14650, 18500, 16340, 17500, 18700 Batteries. The Operation Temperature of F2 2A Charger are range from 0'C to 40'C. The LED indicator can show you if the batteries are full or not. This is Euro Plug

Original Listman F2 2A Dual-Slot Charger for 22650 / 18650 / 14500 / 18350 / 14650 / 18500 / 16340 / 17500/18700 - ABS, UK Plug $6.99
The Listman F2 2A Charger is compatible with Li-ion: 26650, 22650, 18650, 14500, 18350, 14650, 18500, 16340, 17500, 18700 Batteries. The Operation Temperature of F2 2A Charger are range from 0'C to 40'C. The LED indicator can show you if the batteries are full or not. This is UK Plug

Original Listman F2 2A Dual-Slot Charger for 22650 / 18650 / 14500 / 18350 / 14650 / 18500 / 16340 / 17500/18700 - ABS, US Plug $6.99
The Listman F2 2A Charger is compatible with Li-ion: 26650, 22650, 18650, 14500, 18350, 14650, 18500, 16340, 17500, 18700 Batteries. The Operation Temperature of F2 2A Charger are range from 0'C to 40'C. The LED indicator can show you if the batteries are full or not. This is US Plug

Original Basen BC-2 Dual-Slot USB Charger for 18650 / 18700 / 20700 / 21700 / 22700 / 25500 / 26650 / 26700 Batteries, etc. $9.99
The Basen BC-2 USB Charger is made of Flame Retardant Material, which is wide adaptability to charge different size and types of batteries: 3.6V / 3.7V Li-ion Batteries: 10440, 14500, 14650, 16340, 16650, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 20700, 21700, 22700, 25500, 26650, 26700.

Original Basen Ant1 One-Slot USB Charger for 18650 / 20700 / 21700 / 26650 Batteries $7.99
The Basen Ant1 USB Charger is compatible with 18650, 20700, 21700, 26650 batteries. The Ant1 USB Charger has multiple protection that ensure your charging safety like Auto detect charging function, Low voltage activation function, Short circuit protection, and Reverse polarity protection.

Original Basen BO4 Four-Slot USB Charger for 18650 / 18700 / 22650 / 20700 / 21700 / 26650 / 26700 Batteries, etc. $14.99
The BO4 Battery Charger has four independent charging channels, it can charge four lithium batteries at the same time. Users can choose different charging current to meet the needs of slow charge or fast charge. And the charger will display the status of each rechargeable battery when charging. It can charge for different types of DC 3.7V cylindrical lithium batteries 10440, 14500, 14650, 16340, 16650, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 20700, 21700, 22700, 25500, 26650, 26700 and 1.2V Ni-MH / Ni-CD AA, AAA, A, C, SC, rechargeable batteries. Comes with special charge and discharge management circuit. With multiple security protection settings, the charger can effectively prevent reverse, short circuit, overcharge, over discharge, over-current damage to the battery, which makes users using the product without any safety concern.

Original ThinkVape Thor AIO Pod System Kit Replacement Pod Cartridge with 0.2ohm & 0.5ohm Mesh Coils(1 PC) $5.99
The Think Vape Thor AIO Pod Cartridge is compatible with ThinkVape Thor AIO Pod System Vape Kit as a replacement part, which comes with 3ml E-juice capacity and bottom adjustable airflow system. There are two types of coils for different vaping: 0.5ohm Mesh Coil and 0.2ohm Mesh Coil.

Original ThinkVape Thor AIO Pod System Kit Replacement RBA Coil Head(1 PC) $4.99
The Think Vape Thor AIO Replacement RBA Coil Head is designed for Think Vape Thor AIO Pod System Vape Kit as a replacement part. It fits for DIY vaping lovers.

Original SMOKTech SMOK Nfix Pod System Kit Replacement Cartridge with 0.8ohm Coil(3 PCS) (Standard Edition) $10.99
The SMOKTech SMOK Nfix Replacement Pod Cartridge is designed for SMOK Nfix Mod Pod System Vape Kit as a replacement part, which is made of PCTG material. It comes with 0.8ohm MTL DC Dual Coil amd 3ml E-juice capacity. With DC MTL 0.8ohm coil, the SMOK Nfix pod will bring you the wonderful MTL vaping. 3 PCS / Pack.

YFTK Roulette RTA Clone Replacement Top Cap Tank Tube $4.39
The YFTK Replacement Top Cap Tank Tube is suitable for YFTK Roulette RTA Clone as a replacement part, which is made of PC material and comes with 3.5ml E-juice capacity.

Original Flagbearer QSX-W001 USB Miniature Sodium Hypochlorite Disinfectant Generator $8.99
The Sodium hypochlorite generator is a kind of water treatment disinfection sterilization equipment. The equipment uses saline as raw material to produce sodium hypochlorite solution through electrolytic reaction. Sodium hypochlorite is a strong oxidant and disinfectant. It takes place from a wide range of inexpensive industrial salt or seawater dilute solution, and it occurs through electrolysis without diaphragm. To ensure that sodium hypochlorite is fresh in texture and has high activity. To ensure the disinfection effect, the device will add sodium hypochlorite while it is occurring. Compared with chlorine and chlorine compounds, it has the same oxidizing and disinfecting effect. Just add water, tap water and common salt to produce 84 disinfectant (also called sodium hypochlorite disinfectant), with a sterilization rate of up 99.99% can be used anywhere, family, dormitory, school, kindergarten, hotel, hospital, office, restaurant, etc.

Original Vaporesso Gen Nano 80W 2000mAh Box Mod $42.99
The Vaporesso Gen Nano TC VV VW Box Mod is powered by a built-in 2000mAh battery with 2A fast charging design and Max. Output Power 80W. It adopts textured rubber coating material to bring you smooth grip, portable size, scratch resistance function and fingerprint resistance function. And driven by AXON chip, it supports 4 modes for your option: Pulse Mode, Power ECO, Smart TC and DIY. Moreover, it is equipped with a 0.91-inch OLED screen to display clear details and bring you a more convenient operation.

Original Vaporesso Gen S 220W VW Box Mod $42.99
The Vaporesso Gen S 220W VW Box Mod is equipped with the intelligent AXON chip, GEN S makes advanced devices more accessible to users. GEN S truly realizes the power isn't just for the pros.

Original Vaporesso NRG-S Sub Ohm Tank Vape Atomizer Clearomizer $20.99
The Vaporesso NRG-S Sub Ohm Tank is constructed from stainless steel and glass, which features large 8.0ml E-juice capacity. It is perfectly match the Vaporesso GEN S VW Box Mod to make a great vapor for you.

Original Vaporesso GTX 22 Sub Ohm Tank Vape Atomizer Clearomizer $14.99
The Vaporesso GTX Tank 22 is constructed from stainless steel and glass, which features 3.5ml E-juice capacity and two types of GTX MESH Coil: GTX 0.2ohm MESH Coil (Pre-installed) and GTX 0.6ohm MESH Coil (In box). The replaceable Vaporesso GTX Coil brings dense and rich flavor to the vapers. With easy top refill and bottom airflow, the GTX Tank 22 is friendly to starters and beginners. The optimized GTX coils and the new GTX TANK 22 work perfectly to deliver great flavor in an instant when you vape, bringing the ultra-smooth airflow and rich clouds to you.

Original Vaporesso Gen Nano 80W 2000mAh Mod Kit with GTX Tank 22 $54.99
The Vaporesso Gen Nano Kit consists of a 2000mAh Gen Nano TC VV VW Box Mod and a 3.5ml Large GTX Tank 22 Atomizer, both of which are large enough to provide you with long-lasting vape. It adopts textured rubber coating material to bring you smooth grip, portable size, scratch resistance function and fingerprint resistance function. With a GTX Tank 22 and GTX Coils, it delivers fresh flavor, dense cloud and smooth airflow to you. Furthermore, with 2000mAh mod and 2A fast charging design, it can fire up to 80W output power. And driven by AXON chip, it supports 4 modes for your option: Pulse Mode, Power ECO, Smart TC and DIY. Moreover, it is equipped with a 0.91-inch OLED screen to display clear details and bring you a more convenient operation.

Original Vaporesso Zero Care 650mAh Pod System Kit $14.99
The Vaporesso Zero Care is well-known as the pacemaker of the refillable Pod system kit, which is powered by built-in 650mAh battery. Coming with an extra mesh pod and four eye-catching colors make it more invincible now. You'll experience the perfect flavor delivery and throat hit with this new pod. Moreover, the unique CCELL pod is optimized for higher nicotine satisfaction. The innovative filling system - Press to Fill (PTF TM ) makes refilling as simple as it gets, significantly reducing leakage. What's more, it comes with a 2ml E-juice capacity and one Zero CCELL Pod (1.3ohm) and one Zero MESH Pod (1.0ohm) for options to meet your different vapor needs.

Original Vaporesso Gen S 220W Mod Kit with NRG-S Tank Atomizer $59.99
The Vaporesso Gen S Mod Kit consists of Gen S 220W VW Vape Box Mod and NRG-S Tank Atomizer, which is equipped with the intelligent AXON chip, GEN S makes advanced devices more accessible to users. The GEN S matches an upgraded NRG-S tank with the GT MESHED and GT4 MESHED coils included, keeping giving extra power for every flavor punch. GEN S truly realizes the power isn't just for the pros.

Original Snowwolf P40 Mini 40W 1100mAh Pod System Vape Starter Kit $31.18
The Snowwolf P40 Mini Kit is a small but powerful all-in-one (AIO) Pod System Vape Starter Kit. The shell is made from lightweight Aluminum Alloy, the outline is almost square, but the edges and corners are very rounded. The main body is equipped with a complete control panel. The traditional fire button, 0.42-inch monochrome display, and a pair of adjustment keys are standard. Snowwolf P40 Mini is powered by a built-in 1100mAh battery, with the help of the USB Type-C port on the bottom, you can achieve 2A and 10W fast charging. What's more, Snowwolf P40 Mini is equipped with IFV960 Smart Chip, which can use 5 watts to 40 watts of variable wattage, auto mode, and special intelligent power curve and RBA mode. Under Auto Mode, P40 Mini would automatically adjust the wattage based on the coil put in. Different from the previous product, P40 Mini has a special working mode: Smart Wattage Curve Output, which can be achieved the best balance between the power and the taste. Use Taze Series RBA Coil (Not included, Sold Separately) to achieve RBA Mode to help you DIY your vaping style. The P40 Mini Pod is made from PCTG and can hold up to 5ml of E-juice, filled juice through the side holes. Snowwolf P40 Mini uses the new New Pod Mesh Coil-Snowwolf TAZE Coil, there are three types, all with airflow adjustment. (0.6ohm Taze-Beta Coil is included, but 1.0ohm and 0.3ohm Coils are not included, Sold Separetely)

Original Snowwolf P50 50W 1250mAh Pod System Kit $35.63
The Snowwolf P50 Kit is constructed from durable zinc alloy, with a stylish and beautiful flip shell, the size is moderate. The intuitive fire button is on the side, the Type-C charge port is below the button, and the color display with a touch screen is installed on the wide side panel. Instead of using the traditional push-button "+" and "-" buttons to adjust the power output, the touch screen to adjust. Snowwolf P50 is powered by an built-in 1250mAh battery with fast charging through 5V / 2A. The Snowwolf P50 has a built-in smart IFV960 chipset. The chipset supports 5 watts to 50 watts of power, provides incredible response speed, and has a coil recognition function while outputting large clouds of delicious vapor. It also supports RBA mode by matching the RBA coil. (Not included, Sold Separately) At the top sits a 4.5ml refillable pod featuring side fill system, while the bottom accepts coils from the Snowwolf TAZE Coil Series, offering three different coils and an RBA option that caters to those that love building. The standard kit will only include two interchangeable options with a resistance of 0.6ohm. The other side has air intake, by the bottom of the Taze coils to rotate the ring for airflow adjustment.

Original Exvape eXpromizer TCX DL RDTA $42.90
The Exvape eXpromizer TCX DL RDTA is the self-winding vaporizer from EXvape which is constructed from Stainless Steel (body), Glass (tank tube), and POM (drip tip) in 25mm Diameter, it is specially designed for direct lung vape. It features large 7.0ml e-liquid capacity with top filling way and top airflow system, the airflow will hit the coil directly to bring you the amazing flavor. The EXpromizer TCX is the first self-winding vaporizer from EXvape, which is designed for vaping for direct lung inhalation (DL). It is a top coiler vaporizer, whereby the liquid is directed from the lower tank to the cotton wool via the capillary action of stainless steel wicks. The winding deck has two clamping jaws, to which you can simply attach a screen coil or mesh coil by screwing. The air flow holes at an angle on both sides lead the air supply directly to the coil. The EXpromizer TCX is filled with Liuqid via a side fill system. By rotating the top cap, the airflow opening is positioned over the fill opening in order to fill the tank. The liquid tank can be filled with up to 7 ml of liquid. Due to the design of the evaporator and the installation of the air supply at the top, the EXpromizer TCX is a leak-proof system.

ShenRay Taifun GX MTL / DL RDTA Clone $26.00
The ShenRay Typhoon Taifun GX MTL / DL RDTA Clone is constructed from 316 Stainless Steel and Glass material in 23mm Diameter featuring a flavour-focused interchangeable air flow system, easy-build coil winding deck, and SS liquid feeder cables to quickly deliver liquid to the deck down to every last drop in your tank. It also features a modular structure that allows the build deck to be removed from the lower tank and airflow section to allow easy user access to the wicks and the changeable air disks. Moreover, the RDTA supports MTL vaping and DL vaping experience and comes with 4ml E-juice capacity glass tank tube.

YFTK Taifun GX MTL / DL RDTA Clone $27.99
The YFTK Typhoon Taifun GX MTL / DL RDTA Clone is constructed from 316 Stainless Steel and Glass material in 23mm Diameter featuring a flavour-focused interchangeable air flow system, easy-build coil winding deck, and SS liquid feeder cables to quickly deliver liquid to the deck down to every last drop in your tank. It also features a modular structure that allows the build deck to be removed from the lower tank and airflow section to allow easy user access to the wicks and the changeable air disks. Moreover, the RDTA supports MTL vaping and DL vaping experience and comes with 4ml E-juice capacity glass tank tube.

Original Asvape Hita Mech Mod RBA Pod System Kit original price $39.99, now only $32.99
The Original Asvape Hita Kit is a pod device based on a mechanical mod design. It combines pod and mechanical design. The retro appearance of the mechanical lever combines the high-quality flavor of the POD device, which is portable and safe to operate. Asvape Hita Mech Pod Kit is powered by a built-in 1000mAh battery with max 30W output, which can easily support your long term requirement. And use Type-C charging port for fast charging, faster and safer, 1h can be fully charged, extra-long battery life. In addition, the intelligence chipset Reekbox developed by Asvape, which can automatically identify different coil resistance and match the best output power. Create perfect fogging effects, whether you are just getting started or advanced players can quickly master. Asvape Hita Mech Pod Kit also features indicator light with the fire button always inform the user as to the current battery levels. Asvape Hita Mech Pod comes with 3ml capacity. Convenient filling of juice liquid by opening the side silicone plug. Equipped side air inlet adjustment. The set comes with two mesh coils for DTL and MTL vaping. Asvape Hita is also compatible with RBA coil for DIY vaping. (RBA Coil is not included).

810 to 510 Drip Tip Conversion Adapter Connector for SMOK TFV8 Tank(1 PC) $1.99
The 510 Drip Tip Adapter Connector is made of Acrylic material featuring 7mm height and 22mm diameter, it is suitable for SMOK TFV8 Tank as a replacement part. With this adapter, you can use the standard 510 drip tip in your TFV8 Tank.

Original Wotofo Profile Unity RTA Replacement 810 Drip Tip $4.99
The mission for a drip tip is to supply vapor that generated from the atomizer. Most people choose drip tips on their personal preference for appearance. Of course appearance matters, however, drip tips do make a difference in flavor. The new profile unity RTA drip tip which is still made of resin kept the 810 connection standard for custom replacement if you prefer your own. It is nearly 2 times thicker than the one for the Profile RDA, but the center passage is smaller and has a gradual reduction in diameter downwards. The thickness is for consideration of heat dissipation and comfort, allowing the drip tip to snugly fit between your lips, while the center passage design facilitates flavor delivery. The passage size for the new profile unity RTA drip tip is tested to best balance air circulation and flavor enhancement.