Elektronická cigareta | Vaping Fórum

Hi guys, I want to introduce the Vapor Storm Subverter Mod to you.

Here comes the Vapor Storm Subverter 200W TC MOD. Made of ABS plastic material, the Vapor Storm Subverter is an extremely light weight TC Box MOD with hollow side panels for easy carrying. It works with dual 18650 batteries, which can fire up to the max output of 200W with various working modes. Equipped with the stable and unique chip and the 0.96 inch TFT color screen, the Vapor Storm Subverter can bring you safe and powerful vaping experience.

Parameters
Size: 55 x 27 x 90.2mm
Material: ABS plastic
Battery: dual 18650 battery(not included)
Mode: VW, TC, TCR, adjustable power curves
Voltage range: 0.5V-8.0V
Resistance range: 0.05-3ohm(power mode); 0.05-1.0ohm (TC mode)
Coil supporting: Kanthal, Ni200, Ti, SS, etc
Wattage range: 5.0W-200W
Temperature range: 100-300°C (200-600° F)
Fast balance charging: DC 5V/1.5A
Screen: 0.96in TFT color screen

Features
Portable TC MOD with unique hollow side panels
ABS plastic material with good hand feeling
Dual 18650 batteries with 200W max output
Stable and unique chip for best vape experience
0.96inch TFT color screen design with colorful wattage message

Do you like this mod? Come to gearvita.id to get it now.

Hey guys, this time I'm gonna introduce the Aegis Squonk Mod by GeekVape. If you are looking for a decent squonk mod terbaik, I think that will be a good choice. Here are more details.

GeekVape Aegis Squonk Mod maintains many of the protective features that are signature to the AEGIS lineage. Reporting an IP67 rating, it is shockproof against falls and drops that would otherwise irreversibly damage other mods, while providing a strong sealed exterior to protect against water damage.

Furthermore, this mod calls on the advanced AS-100 Chipset, accurately identifying any attached atomizers, rapid and responsive firing times, and allowing the use of atomizers with a resistance as low as 0.05ohm. At the back of the mod, an interchangeable squonk section can be swapped to change the squonk backing into a non-squonk piece, preventing potentially leaky juice to be stored in the back.

Main Features
1. Powered by single 18650 batteries with 100W max output
2. New AS-100 chipset with excellent accuracy and stable power output
3. IP67 waterproof, shockproof, dustproof
4. Immaculate waterproof Squonk system
5. Clear OLED display for details tracking

You may also like: artha pod mod indonesia

Hello guys, this time let's look at the MD RTA by Hellvape, don't miss out if you like it. For more rta terbaik, just check the gearvita.id online store.

Measures 24mm in base diameter, Hellvape MD RTA can store up to 4ml or 2ml with different glass tubes. To refill there is a slide-to-open top cap with a childproof lock where the drip tip requires removing. Since the MD is positioned as an MTL and DTL tank, the airflow is the main design consideration for both vaping styles. To achieve this, Hellvape have added "turntables" - removable airflow restrictors - on the deck, they contain the airflow outlets to concentrate the airflow on to the coil.

With purchase, you can get two different turntables from the box. Each turntable has a different pattern or airflow outlets, the Turntable A has an airflow slot or 3 holes (restricted airflow), while the Turntable B has a larger slot or a 7 hole honeycomb pattern (less airflow restriction). After deciding on which turntable to use, rotate it to select between a slot opening or holes for the airflow to the coils. At last, you can also tailor the airflow to your preference via the control ring (6 settings) on the base of the tank.

You may also like: vaporesso xtra pod kit indonesia

Hey guys. This time we'll be covering the Nugget AIO Kit by Artery. If you are looking for a versatile mod pod kit for both MTL and DTL vaping, then you shouldn't miss it.

Artery Nugget AIO Kit is a powerful pod mod vape that features a distinctive appearance. Constructed from durable zinc alloy, the chassis of the Nugget AIO is able to withstand light to moderate falls and drops with ease. Powered by a built-in 1500mAh battery, the Nugget AIO can fire from 5-40W and allows for a long vaping time. When the battery is running low, you can charge it up via the Type-C USB port on the side. For easy operation and monitoring of the device, there are two adjustment buttons and an HD screen above the USB port.

As for the tank, it has a capacity of 2ml and can be easily refilled via a top filling port. Since the tank is embedded inside the zinc alloy chassis, you can only observe the e-juice level through the view window on the side of the device. Heating elements included in the package are a 0.3ohm mesh coil and a 1.4ohm parallel coil, they can always meet your needs whether you prefer DTL vaping or MTL vaping. Correspondingly, there is an adjustable airflow system at the bottom of the tank. Anyway, the Nugget AIO is worth every penny.

You may also like: cartridge smok rpm 80 indonesia

Hello guys, this time let's look at the SXmini SX Auto Kit by YiHi, which features an auto-squonking system. For cheap MK e-liquid, you can check gearvita.id. Here are more details.

YiHi SX Mini Auto Pod Kit uses the similar advanced YiHi SX650J Chipset as the XClass Mod. This chipboard features an integrated ESS system (Electronic Spray Squonker) with an automated squonk motor that automatically sprays e-liquid into the coil for supporting atomizers such as the ADA. In traditional pod systems, you may often find that if the coils are not properly saturated, you may experience a dry hit. The SXmini SX Auto does not have this problem thanks to its ESS spray technology and its chipset which senses when the coil has become too hot. In the latter case, the device will not fire. Inside the device, there's an internal 3.5mL tank that resides in a 100% sealed chamber to limit any leakage. You may always feel safe when carrying this small pod setup.

Powered by a built-in 1400mAh battery, the SX Auto can last a decent vape time and supports two different working modes including Auto mode & DIY mode. A full charge takes about 100 minutes and the pump does not utilize a lot of power to extend battery life. In Auto mode, the SX ADA atomizer will be detected automatically, but you may also set the mod to the DIY mode for use with the rebuildable version of the SX ADA. Looking at the picture, you can see that the ADA is built with adjustable airflow control which is done by pivoting the airflow cap. While in Auto mode, the SXmini SX Auto will intelligently pump e-juice based on its density, but you may also adjust it to your liking. And, there are also three power output settings (P1/P2/P3).

Anyway, SX Auto is ideal for kinds of vapers though it has advanced technology and produced a dripper-like experience.

You may also like this: vaporesso target pm80 indonesia

Hi guys, today I'll introduce the latest product from VOOPOO, its name is Drag S Mod Pod Kit.

VOOPOO DRAG S Kit is a compact and ergonomic pod mod system kit that consists of a 4.5ml pod cartridge and a 2500mAh built-in battery. As for the pod cartridge, it adopts a bottom refilling design and innovative infinite airflow system for the most comfortable experience. With PnP-VM1 0.3ohm coil and PnP-VM5 0.2ohm coil, it is also compatible with the other PnP coils, which can bring you DL and MTL vaping experience. And regarding to the mod, it features adjustable power in the range of 5 to 80 wattages. Monitored by GENE.TT chip, it can ignite within 0.001s, and also provides intelligent functions such as PUFF recording, SCORE ranking, SMART switching start mode, and so on. Besides, there are 7 safety protections to ensure your safety, like Overtime Protection, Short-circuit Protection, Overcharge Protection, Max Power Protection, Output Over-current Protection, Over-Discharge Protection, and Over-temperature Protection.

DRAG S Mod Pod Kit Details:
1. Come with 4.5ml e-juice capacity and bottom filling design
2. Powered by 2500mAh built-in battery with 60W max output
3. Support PnP-VM1 0.3ohm coil and PnP-VM5 0.2ohm coil
4. Charged via Type-C 5V/2A for fast charging
5. Adopt innovative infinite airflow system for the most comfortable experience
6. Add score ranking mode to unlock the new level from "IRON" to "KING"
7. Provide both button and auto for you for DL or MTL vaping
8. Automatically identify the inserted coil and match the best wattage to prevent any misuse
9. Monitored by GENE.TT chip for 0.001s ignition and PUFF recording, SCORE ranking, and SMART switching start mode
10. Provide 7 safety protections, such as Overtime Protection, Short-circuit Protection, Overcharge Protection, Max Power Protection, Output Over-current Protection, Over-Discharge Protection, Over-temperature Protection and so on

The package of DRAG S Mod Pod Kit Comes With:
1 x DRAG S Device
1 x DRAG S Replacement Pod 4.5ml
1 x PnP-VM1，0.3Ω
1 x PnP-VM5，0.2Ω
1 x Type-C Cable
1 x User Manual
1 x Warranty Card
1 x Chip Card

Do you like this pod mod kit? It can be found at our toko vape online now.

Hey guys. Do you like pod systems that look like vape pen kits? This time let's check out such a vape pod named SXmini Mi Class by YiHi. Just put it to your collection if you like. Here we go!

YiHi SXmini Mi Class is constructed with durable Stainless Steel materials and elegant paisley designs, the high-level craftsmanship offers a high-end hand feeling. Powered by a 400mAh built-in battery and integrating the latest SX290 chipset, it has a wattage range of about 7 to 13W and an intuitive OLED display to showcase battery life, output power, and puff count. The battery is charged via the micro-USB charging port located at the bottom of the device alongside a reset button for any troubleshooting.

As for the pod, it can hold up to 1.5ml of e-juice and can be refilled via a threaded top-filling structure. The heating element included in the set is a 1ohm Ceramic Coil, which is very suitable for Nic Salts and can bring relatively consistent flavors. All in all, the SXmini Mi Class is worth a shot!

Main Features
1. Constructed by Stainless steel, Photochemical etching
2. Powered by YiHi SX290 chipset, 400mAh Built-in Battery
3. With LED display
4. One fire button design
5. 1.5 ml e-juice Cartridge capacity, easy to refill
6. Micro USB port for charging

You may also like: ohm aio indonesia

Hello guys. Do you like the Air or Air Plus by Suorin? This time I'm gonna introduce a pod mod kit named One Vape AirMod, it looks very like the Air and Air Plus. For cheap Hexohm e-juice, you can check gearvita.id online store.

One Vape AirMod 60 Kit features an impressive 6mL pod capacity and can accept coils from the One Vape Air Coil Series. Constructed from durable zinc-alloy, the chassis is weighted and exudes high-quality construction. Powered by a built-in 1500mAh battery, it has a wattage range of 5-60W. Operating off a dual firing mechanism, the AirMod Pod System can be used as a draw-activated or button activated device, firing the installed 0.2ohm AirDM Coil or the included 0.5ohm DQ Coil.

Featuring a side-mounted airflow control switch, the AirMod can be used in an MTL or DTL fashion, delivering delicious clouds of vapor on demand. Displaying relevant vape data to the 0.69" OLED Screen, the One Vape AirMod is a solid and great vape system for those on the go. Anyway, you simply can not go wrong with the One Vape AirMod. Just give it a shot!

You may also like: pod vinci x indonesia

Hey guys. Have you ever used mod pod kits powered by dual 18650 batteries? This time I'm gonna share the Nugget GT Kit by Artery, which is exactly such a device. Here we go!

Artery Nugget GT Kit seems to be the world's first dual 18650 pod mod device. With 200W of output from dual 18650 batteries, this pod mod stands alone in the pod mod marketplace. A micro USB charging port at the bottom of the control face permits for a fast balanced recharging process due to a 2A micro USB interface that simply plugs into any USB outlet with the included cable. All this capability comes from an innovative Aero chipset which also permits easy and fast navigation of the full color 0.69" display screen with a vertical menu. Plus, a multitude of safety features include overcharge, 6-second cutoff, overheat, short circuit, and reverse polarity protections. Although the Nugget GT has 200W of power, it still is quite portable as any other pod system.

Another incredible aspect of the GT kit is the pods that feature an incredible 8mL capacity and are easily refilled via a bottom juice port. At the top, there's an ergonomic mouthpiece while airflow enters the cartridge from the bottom via two inlets on the sides that are structured in a transverse configuration for a smooth vape experience. Compatible coils are the 0.15ohm XP coil and 0.4ohm XP, both of which are included with purchase. Lastly, the mouthpiece may be replaced with any 510 drip tip if you purchase an adopter, but it is not included in the package. Like it? Just give it a shot!

You may also like: smok x pozz indonesia

Hello guys. Do you like the Drag series by VOOPOO? This time we'll be covering a new member from the Drag family – Drag X, it is a good device for my JVS e-juice. Here are more details.

VOOPOO Drag X Kit is made of metal and leather, that's why it is not only soft, but also has advantages of anti-scratch, anti-perspiration, and anti-fingerprint. Powered by a single 18650 battery, it can fire from 5-80W. With the new GENE.TT Chip, Drag X features fast ignition (only takes 0.001s) and high burst. GENE.TT Chip also offers intelligent functions such as PUSS and SCORE ranking mode. In addition, the SCORE ranking mode helps you continuously unlock the new level from "IRON" to "KING" according to the cloud size of each suction. It comes with a 5-80W power range to fit your needs and the 80W max power will enable you to make bigger flavorful clouds.

Drag X is designed with an innovative infinite airflow system that supports the regulation of any size of the airway. Most importantly, you can enjoy the most comfortable experience through this system no matter which kind of coil or different parameters are set! As for the pod, it can hold 4.5ml big e-juice capacity and adopt a wide range of coils, including RBA. 510 adapters and other new technologies are also be added to this pod. Drag X is equipped with 0.15ohm and 0.3ohm PnP coil and it is compatible with all PnP coils.

You may also like: xtra pod indonesia