Elektronická cigareta | Vaping Fórum

Hey guys. Have you used the pod system kit by Aspire? This time we'll be covering their Cloudflask Kit, if you are looking for a DTL vape kit that uses pods, perhaps it is the setup you should buy.

Aspire Cloudflask Kit is ergonomically designed to make it easy to operate and features premium stainless steel materials with optional microfiber leather cases in black, brown, grey, or red. Moreover, each case has a strap to make it effortless to carry. And, the Cloudflask is built with a massive 2000mAh battery and makes recharging effortless with a Type-C fast 2A charging interface. An RGB LED permits monitoring of voltage output which is quite important as the kit only operates in bypass mode, so output depends a lot on the cell's charge level. With a full battery, the Cloudflask can generate 50W of power.

If safety is one of your concerns, don't worry as a multitude of safety protections are built-into the latest Aspire ASP chipset. Additionally, the pods of the Cloudflask can store 5.5mL of e-juice and have a juice port with a leak-free silicone seal. Unlike competing devices, the cartridges are secured to the pod with durable metal fixings for longevity and to make sure they don't move around. Therefore, removing the pod is as easy as pressing a pod release button. Inside each pod is a 0.25ohm coil that operates best in the range of 40-50W. It features a mesh heating element for incredible vapor production and it is installed via a push/pull method for a fast, mess-free process.

You may also like: harga target pm80

Hey guys. This time we'll be covering the GTX One Mod by Vaporesso, you may give it a shot if you are looking for mod vape terbaik. Here we go!

Vaporesso GTX One Mod gets an elegant design and comes in six colors. Its chassis is constructed from zinc-aluminum alloy and goes around a soft-touch rubberized coating, which gives a unique tactile and super slick feel. The mesh-like pattern makes it very comfortable to hold and less likely to slip out of your hand. Powered by a built-in 2000mAh battery with a smart AXON chip, the mod can fire at up to 40W. Charging is done by way of a Type-C port at the base of the front panel.

Like most of the pod devices, the mod uses a three-button interface making the user experience much more straightforward and easier. The round fire button is clicky and comfortable to use with either your thumb or your index finger. The 0.96-inch OLED screen in black and white is nothing fancy but he readouts are large and clear. On the bottom of the mod, you can see the battery information and venting ports. Anyway, the GTX One Mod has the potential to be the best mod for MTL vapers in 2020.

You may also like: beli smok alike kit

Hey guys. Do you like the vape atomizers by Hellvape? This time let's look at their Dead Rabbit V2 RTA, and it will be available in gearvita.id online vapor store soon. Here we go!

Hellvape Dead Rabbit V2 RTA can hold a maximum of 5ml of vape juice. To fill it, simply slide the top cap to reveal the large filling port. The biggest change of the Dead Rabbit V2 RTA is the build deck. It adopts the four-post design, as we've seen with the Dead Rabbit V2 RDA, but with a twist. They raised the posts to give you even more room to build on and it also makes it easier to cut the leads off the coils. With that being said, coil installs would be an absolute breeze. It gets even better, just like the original, it supports both single and dual coil builds. Whether you want to throw in a huge single coil, or dual coils, you sure can with this RTA. Another unique feature is on the bottom of the build deck. It uses a PC thermal insulation plate, which helps redirect heat from your mod while preventing accidental scratches.

The Dead Rabbit V2 RTA keeps another key feature which is the adjustable top airflow design. However, it features a diagonal honeycomb design which not only smooths out the draw but provides excellent flavor production. Not to mention, you won't be getting any leaking either. Lastly, it's constructed out of stainless steel material and has an engraved logo on the chamber. Whether you're a fan of the original version or in the market for a new top airflow tank that supports various coil builds, you'll want to check out the Dead Rabbit V2 RTA. It offers some awesome improvements in the design, providing you vapers with an even better quality product.

You may also like: harga aegis pod

Have you used the sub ohm tank by FreeMax? This time we'll be covering their M Pro 2 Tank, and it will be available in the gearvita.id kawat vape store soon. Here we go!

FreeMax M Pro 2 Tank is the follow up to the popular M Pro Tank. It retains a slide-to-open top filling juice port, but friction has been enhanced on the top cap via three steel balls to make it easier to access. And, with the bulb juice reservoir installed, the tank can hold 5mL of juice for long vape times, but EU residents may only receive the 2mL standard tube. But that is not all that makes the M Pro 2 different from its predecessor. You see, there's also the new Coiltech 4 technology that features the latest and greatest mesh coils.

These heads are constructed with military-grade SS904L stainless steel mesh heating elements to provide an incredible vape experience when compared to older coil systems. And the M Pro 2 coils feature tea fiber cotton for health and to enhance flavor production. With the purchase, you will receive both the 904L M2 Mesh coil and the 904l M1 coil. The M2 has a 60 to 90W range and operates at a 0.2ohm resistance, while the M1 works from 40 to 70W with a 0.15oohm resistance. There are 2 higher wattage coils available as well: the 80 to 110W M3 and the 70 to 110W M4. However, these are not included with purchase.

You may also like: beli smok pozz x

Hey guys. Do you like the vape devices by Artery? This time I'm gonna introduce their MT4 Kit, you shouldn't miss out on it if you are looking for vape pod terbaik. Here we go.

Artery Vapor claims that the main reason for the design of the Artery MT4 Kit was to ensure affordability, yet incredible performance and ergonomics. This device only weighs 25g and measures 23mm x 14mm x 91.8mm, so you won't feel it in your pocket. And, the finish features dragon skin texture for ultimate ergonomics and an incredible appearance. Moreover, the Artery MT4 works with a 480mAh battery that is rechargeable via a USB port and of which the voltage is indicated via a tri-color LED. The maximum wattage this cell produces is 11W and firing is done by simply taking a puff.

What's more, a multitude of safety features include overcharge, overheat, over-puff, and short circuit protection. At the top of the Artery MT4 is a 2mL cartridge with an easy refill system. It is recommended that this kit is used with nicotine salt e-liquids as the coils used range from 1 to 2ohm. While airflow is not adjustable, flavor boost technology ensures you'll get plenty of taste from your favorite high nicotine or nic salt e-liquids. Anyway, you can simply not go wrong with the Artery MT4.

You may also like: harga vaporesso xtra pod

Which product line of Teslacigs do you like best? My favorite is the Invader range, and this time I'm gonna share a new mod pod named Invader GT. Here we go!

Teslacigs Invader GT Kit is a different type of pod kit with more options than you can usually find. Inside the device is a 1200mAh internal battery. Apparently you can charge this fully in 1.4 hours at a 1A charging rate via the USB Type C port. Output wise this will output between 7 and 50W. But there is no screen. What you do get is a dial with 5 settings on – which mimics the VV dial on the bigger versions. So at a glance, you can see what mode you have set. Below the dial is a switch with 3 positions. This is to select how you fire the device. You can choose between auto inhale fire, pressing the fire button or a combination of both. An LED indicator informs you of the battery capacity remaining.

As for the pod, it is removable and refillable via a side fill port. I am not sure if you can change the coils or if they are fixed. The Teslacigs website is a bit vague. However, there are plenty of coil options and the fact there is an RBA coil means they might be replaceable. The coil options аре T-P1 Mesh 0.2ohm coil, T-P2 Regular 0.6ohm coil, T-P3 Mesh 0.8ohm coil, T-P4 Mesh 0.3ohm coil, and RBA-P1 DIY rebuildable coil. The pod is secured in the device magnetically and you can rotate the mouthpiece to the angle you feel comfortable.

You may also like: beli vaporesso osmall

Hey guys. Have you ever used the PAL range by Artery? This time I'm gonna introduce the PAL LT Kit which is an ideal device for e-liquid salt nic terbaik. Here we go!

Artery PAL LT can be regarded as the sibling version of PAL SE, it not only inherits the unexceptionable flavor restoration of PAL SE but also comes with a more shinning outlook, colorful displaying, and user-custom supporting. Constructed from lightweight and durable aluminum alloy, the PAL LT is ultra-compact and available in six colors, including two free DIY stickers color. Powered by a built-in 700mAh battery, it has a maximum output of 11W and can easily ensure your full-day vaping. Moreover, it features both draw and button activated firing mechanisms, this means you can directly vape through an air pressure sensor, or by pressing down the button.

Charging is done via a Micro USB port on the side, a full charge takes approximately an hour and a half. A small LED indicator below the fire button will show you the battery level when you vaping or charging. Safety features include overcharge protection, overheat protection, short circuit protection, and 8-second cut off. As for the pod of the PAL LT, it is the same as the one on the PAL SE new version. The standard capacity of the pod is 2ml, with a pair of filling holes hidden at the bottom, easy to fill with liquid, and a built-in 1.3ohm coil. With familiar flavor restoration and tighter draw airflow coming from 1.3ohm, the PAL LT will perform as excellent as the PAL SE new version.

You may also like: harga pod vinci air

Do you prefer RDA single coil terbaik or dual coil RDA? If like the latter better, you may wanna take a look at the Druga 2 RDA by Augvape. The following are more details about it.

Augvape Druga 2 RDA has an overall diameter of 24mm and is primarily constructed of stainless steel. It includes a large wide bore drip tip and even better a 510 BF pin, so you can use it with your favorite squonk mods. On the front you will see the large Druga symbol engraved on the top cap, giving it a unique look. The build deck features two large and wide posts, making it easy to fit various coil builds. However, it does have textured screws allowing you to use flat wire coils as well! This makes it way better than the original variant.

The Druga 2 RDA also sports an adjustable side airflow design. Both sides have six different airflow holes, which can be fully closed or open. With both of them open with a dual coil build you will definitely chuck some clouds. Lastly, adjusting the airflow is quite easy, all you have to do is turn the top cap. If you are a fan of dual coil atomizers or enjoyed the original, then this is a must-have for your collection. The original was incredibly popular, and the Druga 2 offers much-needed improvements, making it much better.

You may also like: beli smok rpm 80

Hey guys. Do you like devices by Vaporesso? This time let's look at their Xros Kit which is a slim pod vape, here we go!

Vaporesso Xros Kit is the latest pod system by Vaporesso and features portability, as well as a simplified design. The kit is constructed from stainless steel with a corrosion-resistant texture that is available in a plethora of color options. Moreover, the Vaporesso Xros uses 2mL pods that are easily refilled and utilize mesh coils for incredible vapor production that is sure to bring out your juice flavors. In the mail package, you will find two cartridges, one of which contains a 0.8ohm coil and the other a 1.2ohm one.

Both should be compatible with higher nicotine e-liquids such as nic salt based ones and you may customize airflow to your liking via an easy adjustment toggle. On the technical level, the Vaporesso Xros utilizes an AXON chipset that permits a maximum of 20W of output with a variety of safety protections and permits both button or draw-activated firing. And, the Xros kit features an 800mAh integrated cell with 1A type-C USB charging system and a battery LED to track the battery's voltage.

You may also like: harga smok fetch pro 80w

Hey guys. This time I'm gonna introduce the Slyeek by OMARI-O. If you are a flavor chaser or looking for pod murah terbaik, then you may wanna take a look at it. Let's dive in for more.

Constructed by aluminum material with sandblasting oxidation on the surface, the eye-catching Slyeek pod system defines the top-notch build quality standard and meanwhile brings the vape aesthetics to the next level. Powered by a built-in 1000mAh battery, the Slyeek can be activated by inhaling, the accurate sensor automatically conveys each puff into vapor, enjoyment, and satisfaction. However, if you are not used to the air-driven style, pressing the fire button also allows you to start the vape journey. Charging is done by way of a Type-C USB port on the bottom of the device, and a full charge may finish in about 90 minutes.

As for the pod of the Slyeek, it can hold up to 2.4ml (Standard Edition) or 2ml (TPD Edition) of e-juice according to the edition you choose. Refilling is a breeze via a port on the side and the pod is transparent enough for easy juice check. To provide real nicotine satisfaction, the pod features a solid nicotine salt delivery system with a 1.2ohm coil. By the way, with purchase you can get two pods with pre-installed coils. All in all, the OMARI Slyeek pod system answers on what matters most to flavor chasers.

You may also like: beli smok nord 2 40w