Elektronická cigareta | Vaping Fórum

Hey guys. Can you imagine a box mod that combines squonker and mechanical features? The Liftbox Bastion by Innokin is exactly such a device, and next, I'm gonna make a detailed introduction to it.

Unique in the vape marketplace is the Innokin Liftbox Bastion's siphon system that features an auto-feed motor that directs e-liquid from the mod's 8ml internal tank to the RDA's build deck. Never drip or squeeze a juice bottle again to saturate your coils! All you need to do is fill the tank, attach your squonker RDA with BF pin, prime your coils, and fire the mod. This unregulated device has the capability of firing as low as 0.1ohm, has a maximum voltage output of 4.2V, and is built with a wide range of safety features that include 0.08ohm cutoff, reverse polarity protection, low voltage protection, and short circuit protection.

For power, the Liftbox Bastion utilizes a single 18650 battery that can be recharged via the micro USB onboard charging system. An LED keeps track of charge levels and will display green (full battery), yellow (half) and red (recharge necessary). From a design perspective, this mod features a stylish appearance and is available in red, orange, green, black, or blue. Made with a carbon fiber finish, this mod will stand the test of time and the side panels can be replaced if you are looking to change the mod's look. The unit is also portable, making it easy to transport in your pocket or purse.

You may also like: harga r80 wismec

Hey guys. Are you looking for decent pod mod kits? Why not check out the latest RPM 2S Kit by SMOK? It is definitely an ideal device to vape with liquid enak 2020, especially if you prefer using external batteries.

SMOK RPM 2S Kit is an update to the RPM 2 Kit. The one major change with this version is that it's powered by an external high drain 18650 battery rather than a built-in battery. Since this is the case, it is slightly longer, but still remains pocket friendly and comfortable in the hands. Additionally, the RPM 2S has a maximum wattage output of 80w. It's fully adjustable using the buttons right underneath the large 1.14" display screen. This is by far one of the largest screens and bigger than most other pod vapes.

What's great about this kit is that you do get two different refillable pods. The first one is the RPM 2 pod that has a built-in RPM 2 0.16ohm mesh coil. Secondly, you've got another RPM 2 cartridge but has an original RPM 0.4ohm mesh coil head. Now, here's the best part, both pod cartridges have a maximum e-juice capacity of 7ml! Lastly, the RPM 2S has an upgraded airflow system, with larger holes allowing for even more clouds!

You may also like: beli novo 2

Hey guys. Are you a fan of the Nord series of vape pods by SMOK? This time we'll be covering the latest addition to this line – Nord X Kit, please keep up with me for more details.

SMOK Nord X Kit features an IP67 rating which means it is protected from rain, water, debris, and dust. It is heavier and bigger than the Nord 2, but wattage is also improved from 40-60W. However, the integrated battery has the same 1500mAh capacity, but you should still be able to vape for extended periods at higher wattage. To recharge the cell, there's a 1.2A quick charging port on the side that will top off the battery within one hour and 15 minutes. And, when the charging process of the Nord X starts, the display screen on the side will show a battery bar with the current-voltage percentage and the time left until charging completes.

The Nord X pods can hold an unprecedented 6mL of e-juice which substantially reduces the need for constant refilling. To add e-liquid, there's a fill slot on the side. And, each cartridge is translucent so you may see the reservoir's current fill level. For versatility, the Nord X Kit comes with two pods that work with different coil types. While there are eight different coils available for the Nord X, the package only includes two. One is the 0.16ohm RPM 2 Mesh Coil pre-installed in the Nord X RPM 2 Pod, the other is the 0.4ohm RPM Mesh Coil inside the Nord X RPM Pod. At last, the pods can also use an RBA head that works with a minimum resistance of 0.25ohm.

You may also like: harga jual artha pod mod

Hey guys. Do you like the vape mod kits by SMOK? This time they are back with their latest Rigel Kit, here are more details about it.

Thanks to refreshing back design, the SMOK Rigel Kit is constructed with a flexible rubber coating with carbon fiber on the side to make it tough, yet have a smooth hand feeling. With 230W of power, it responds to firing within just 0.001s. Power is gained from dual 18650 batteries which should last quite some time, even at maximum output. And, the charging system consists of a USB Type-C interface that delivers reliable power and fast transfer speed. Best of all, multiple protections avoid any risk from vaping on this device. On the control face of the Rigel, you will see a massive 0.96″ full-color display screen with vape data. While this already permits crystal clear viewing of vape data, you may also personalize the user interface to your preference by simultaneously pressing the fire key and the up button.

As for the TFV9 Tank, it operates with V9 coils with mesh heating elements. These types of coils have a bigger heating surface and also heat faster to enhance flavor and vapor. With purchase, you will receive two V9 meshed coils that work in the range of 40-90W. Best of all, you may even install V8 baby coils inside the Rigel Kit, so the entire setup is quite versatile. And, two massive air slots at the bottom are also fully adjustable to further add to the massive vapor production of this tank. Additionally, the tank features a sliding top fill system which means adding juice via a leak-free slot is easier than ever. To refill, you simply slide the top cap to expose a juice port that you may add e-liquid through. Best of all, the juice capacity of the tank is 6.5mL, unless you are located where the maximum capacity is regulated to 2mL.

You may also like: beli harga vinci x

Hey guys. Yesterday we introduced the Rigel Kit by SMOK, do you like it? Today I'm here to let you know its mod will be available separately in gearvia.id online vape store soon, don't miss out on it later if you'd like to get one.

SMOK Rigel Mod is made of quality glass, flexible rubber coating, and lateral design with classic carbon fiber, which will bring you a unique visual sensation and comfortable hand feel. It gains power from dual 18650 batteries and has a maximum output of 230W. And monitored by its outstanding chipset, it can ignite in 0.001s, providing you with the first hit of intense flavor and massive vapor.

In addition, there is a 6-theme-color user interface available. And you can switch between different styles by pressing the fire button and the up button at the same time. Besides, it is equipped with a 0.96" TFT screen to display the basic vape data and help you use the device. Moreover, it adopts USB Type-C for reliable power and faster transfer speed and multiple protections to ensure your health and safety.

You may also like: harga spesifikasi voopoo navi

Hey guys. Do you like the vape devices by Smoant? This time we'll be covering their Pasito 2 Kit, made from zinc alloy and leather, it looks quite luxurious. Here we go!

What sets the Smoant Pasito 2 Kit apart from other pod kits is that it really features a box mod working with both pods and atomizers with the included 510 adapter. It can generate 80W of power from its 2500mAh integrated battery and can do so in a ton of modes. You see, the Pasito II can be set to variable wattage mode, curve mode, bypass mode, temperature control with nickel/titanium/stainless steel heating elements, and TCR mode. Recharging the battery is very easy thanks to a Type-C USB on the control face that works with a 2A current, so it won't take long at all to finish the charging process. Another difference between the Pasito 2 and other pod kits is the full-color TFT screen that has an exquisite vertically oriented user interface. Multiple safety features also include overtime, short circuit, overheat, and low voltage protection.

For a pod system, the e-liquid capacity is usually quite low, but the Pasito 2 can hold 6mL of e-liquid. Plus, it is quite easy to refill the pods via a side refill slot. In combination with top airflow, this means that everything is quite leakproof. Moreover, the previously mentioned 510 adapter permits attachment of other atomizers, making this one of the most versatile vape systems ever. With up to 7 different coil options, including RBA coils, the Pasito II will also meet your needs as far as the exact vape experience you enjoy. Pre-installed inside the included pod is the K-1 Mesh Coil with 0.3ohm resistance and a 35-50W range. Or, you may install the included K-3 half-DTL mesh coil that is best fired from 20-25W. Not included is the K-RBA head that is best with coils from 0.3ohm, but you can purchase this item separately. Best of all, the Smoant Pasito 2 is compatible with all previous Pasito coils as well.

You may also like: beli cartridge rpm 80

Hey guys. This time let's look at the V.THRU Pro Kit by VOOPOO, don't miss out on it if you are looking for a reliable pod vape device. Here we go!

VOOPOO V.THRU Pro Kit is constructed of Aluminum alloy + PCTG and comes with compact finger size. Powered by a 900mAh built-in battery, it can fire from 5-25W and is activated by buttonless air induction. The GENE chip inside can provide a constant output voltage to ensure consistent atomization of nicotine salt, giving you a perfect flavor experience. Charging is done via a 5V/1A Type-C USB port, one charge, enjoy two days. The 0.69' OLED screen shows parameters such as power and power in real-time, records puff totals, and the duration of each puff. VOOPOO are trying to protect children in every detail. It is highly recommended that you use LOCK mode, which can be very effective to prevent children from accidentally starting.

As for the pods included in the kit, they are available in two versions. Both can store up to 3ml of e-liquid and are filled via a side filling port. The coils inside them are different, this means you can switch between 0.7ohm and 1.2ohm for the fullest resolution and flavor. Moreover, these pods adopt 360°full range of fitting lip comfort and independent and one-way condensate space, 75% more leak-proof than other pods. All in all, the VOOPOO V.THRU Pro's mission is to to be the next generation of flavorful, easy to use, low-cost starter suit.

You may also like: harga ohm aio

Hey guys. A new week has come! This time I'm gonna introduce the V.SUIT Kit by VOOPOO, don't miss out on it if you are looking for a decent pod vape device. Here are more details about it.

Made of plastic with a skin-like matte coating design, the VOOPOO V.SUIT Kit is a unique pod system device. Its appearance is similar to a pen kit while the functions reach a rich level of pod system devices. Powered by a built-in 1200mAh battery, it features Smart GENE chip with 5-40W adjustable power. Charging is done by way of a Type-C USB port. VOOPOO V.SUIT can show the vaping data clearly by 0.54 inch OLED screen.

The V.SUIT cartridge is made of PCTG. It maintains 2ml capacity with bottom filling design and two upgraded PnP coils: 1.2ohm PnP-TR1, 0.8ohm PnP-TM2. Moreover, the pod is compatible with VOOPOO's unique PnP platform pods, such as PnP Pod and PnP coils: PnP-VM1, PnP-VM4, PnP-VM3, PnP-R1, PnP-R2, PnP-TM1. All in all, the V.SUIT will lead to a new level of touch and flavor experience.

You may also like: beli vaporesso pm80

Most people who have been vaping for more than 5 years will have probably owned one of the Eleaf "Pico" mods – the original Pico 75, Pico Baby, Pico 21700, or Pico 25 to name a few! My first ever "box mod" was a Pico Mega – which my friend still uses daily! This time we'll be covering the latest Pico Compaq Kit, here we go.

Eleaf Pico Compaq Kit is a new version of the popular "Pico" mod… At first glance this looks like a typical Pico mod – however, it has been designed as a pod mod… Instead of the box mod and tank combo you usually get – this time a removable pod is inserted into the actual body of the device. It is powered by a single 18650 battery that lives inside the mod underneath the square shape battery cap! The wattage is variable and you can choose from 1-60W. An OLED screen is located on the side but the size is sadly not stated. If necessary you can recharge the battery using the USB Type C port at up to 2A charging rate.

The pod is refillable via the side fill port and will hold up to 3.8ml in standard configuration but this is reduced to 2ml for TPD regulated areas. A new coil has been created for this kit called the "GTL" range and so far there is only a 0.4ohm Mesh version to choose from. Luckily you get 2 of these in the kit. A handy little cover cap is attached by a chain to the mod to keep your mouthpiece super sparkly. All in all, the Pico Compaq is definitely worth a shot!

You may also like: harga smok alike kit

Hey guys. Have you ever used the Aegis Boost Kit by Geekvape? This time let's look at its Luxury Edition, here we go!

Constructed of Zinc Alloy & Leather & Silicone, the Geekvape Aegis Boost Luxury Edition Kit is the lightest and toughest pod mod. As the special version of the Aegis Boost Kit, it perfectly inherits all the characteristics of its predecessor. Powered by a 1500mAh built-in battery and built with the AS chip, it can fire from 5 to 40 watts and supports the usage of both pod and RDTA (Boost RBA Pod sold separately).

Besides, the device is IP67 rated made to be corrosion-resistant and tear-resistant and a 0.42 inch OLED screen will show the vaping data clearly. Aegis Boost cartridge comes with a 3.7ml capacity with top filling design. Also, included in the package are 2 separate coils (0.6ohm/0.4ohm) and tips (kit set only) specifically designed for MTL & DL vaping experience.

You may also like: beli smok x pozz